Aluratek CINECAM AHDVC01F Panduan Memulai Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Camcorder Aluratek CINECAM AHDVC01F. Aluratek CINECAM AHDVC01F 2 halaman. Cinecam hd dv camcorder
Juga untuk Aluratek CINECAM AHDVC01F: Lembar data (2 halaman), Panduan Memulai Cepat (2 halaman)

Halaman Cetak

Operating Instructions

STEP 1. Installing the Battery:

The battery is not fully charged and must be fully charged before first use. It is

recommended to charge the battery for a minimum of 2 hours.

1. Open the battery cover.

2. Insert the 3.7V Li-ion rechargeable battery into the camera.

3. Replace the battery cover.

4. Power on / off by holding

for 3 seconds.

STEP 2. Inserting a Memory Card (not included)

AHDVC01F has a very small amount (32MB) of built-in memory. It is highly

recommended to increase the memory capacity with a SD or SDHC memory

card (not included). Follow the instructions below to insert the optional SD /

SDHC memory card into the camera.

1. Turn off the camera.

2. Open the battery door.

3. Insert the SD card into the camera.

Note: There is only one correct direction to insert the SD memory card into the slot. Do not force the

card into the slot, or else it may damage both the camera and the SD memory card.

Note: Most memory cards come pre formatted. If your memory card is not formatted, please follow

these simple procedures.

2. Thumbnail views will be displayed. Use (▲,▼, or

) to select photo / video.

3. Press the

button to view or playback your thumbnail selection.

REC

4. During photo playback, push the (▲or ▼) buttons to zoom in or out.

5. During photo playback, press MODE/MENU button to move up or the REC button

to move down. Press (

) buttons to move left or right to view a specific part of

the picture.

6. When viewing photo in full screen, press (

) to view previous or next photo.

7. In viewing a video clips, Press the REC button to start playing the video and

press again to pause.

8. During video playback, press the (

) button to fast forward or press the (

button to rewind.

STEP 5. Delete Photographs and Video Clips:

Follow the instructions below to delete a photograph or video clip.

1. Press the PLAYBACK (

) button once to enter the photo / video clip playback

mode then select the photograph or video that you wish to delete.

2. Press the DELETE button to enter the delete mode.

3. Press the (

) button to select whether to delete the selected file or delete

all then press the

button to confirm.

REC

4. Press the MODE / MENU button to exit.

Troubleshooting

Problem

Cause

Can not power on the unit

Low battery power. Battery placed at wrong

polarities.

Photos can not be saved when

The memory card hasn't been formatted

taking pictures.

correctly or memory is full.

Can not find removable disk after

connecting the camera to the

Connection failure.

computer.

Photos are blurry

1. AHDVC01F is not held steadily

2. AHDVC01F lens is dirty.

3. AHDVC01F is set to the wrong focus mode.

If you need further assistance, please contact the Aluratek support department for troubleshooting prior to returning this device.

E-mail: [email protected]

Local (Irvine, CA): 949-419-6504

Web: www.aluratek.com/support

Toll free: 1-866-580-1978

Formatting the Memory or SD Card:

Warning: Formatting will erase everything on the card

1. In photo / video set up mode, select SETUP icon by pressing (

enter basic set up mode.

2. Select FORMAT icon by pressing the (▼) button and press

confirm, select YES by pressing the (

) button.

3. Press the

button to confirm formatting the SD card.

REC

Setting the Resolution:

AHDVC01F can be set to different resolutions.

VIDEO

1. Press and hold the MODE / MENU button in video mode to enter the video

set up menu.

2. Select the RESOLUTION by pressing the (▼) button and press the

button to enter the resolution selection.

Connect to TV

Green

Blue

For high definition TV

Red

Video

Audio

White

Red

)

Yellow

For standard

Red

definition TV

White

Audio

Solution

Replace or install the battery correctly.

If the memory is full, use a different memory card. Format the memory card if it was

not formatted.

Warning: Format will erase everything on the card.

Make sure all cable connections are secured and restart the computer if necessary.

1. Hold AHDVC01F steadily until it beeps when taking video photo.

2. Clean the lens with soft dry cloth.

3. Set the macro/normal mode according to the distances of subject.

3. Different resolutions will be displayed. Select the desired resolution by using

the (▲) or (▼) button and press the REC button to confirm the selection.

720P30 (1280 x 720), WVGA (848 x 480), QVGA (320 x 240).

PHOTO

) button to

1. Press and hold the MODE/MENU button in photo mode to enter the photo

set up menu.

button to

REC

2. Select the SIZE icon by pressing the (▼) button and press the

confirm.

3. Different resolutions will be displayed. Select the desired resolution by using

the (▲) or (▼) buttons and press the REC button to confirm the selection.

3.0M (2048 x 1536), 5M (2592 x 1944), 8M (3200 x 2400).

STEP 3. Taking Video or Photographs:

1. Power on AHDVC01F. Hold

for 3 seconds

2. Press the MODE / MENU button to select the photo mode (

mode (

) .

REC

Connect to Computer

Software Installation:

1. Insert CD to your computer.

2. Select "Install MediaImpression"

3. Follow the onscreen instruction to install the

software.

Connect to computer:

1. Power on AHDVC01F

2. Slide the USB switch to open the USB connector

3. Connect AHDVC01F to the USB port on your

computer

4. AHDVC01F will appear on your computer as a

"Removable Drive" in "My Computer"

5. You can manage your pictures/videos using the

MediaImpression software or click on the

"Removable Drive" directly.

Radio and TV Interference Statement

WARNING!!! This equipment has been tested and found to comply with the limits of a

Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in

a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by whatever measures may be

required to correct the interference.

3. Depending on the distance to the object being photographed, use Macro switch

to adjust the distance. Select the flower symbol (

graph (11cm –18cm). To take video or photograph of surroundings or people

(0.5m - infinity), set the Macro switch to Normal mode (

4. Use the LCD screen to aim the object you wish to take video or photograph.

5. Press the

button once to take the picture, or press the

REC

start / stop video recording.

button to

REC

Caution: 1) Taking picture for fast-moving object is not recommended.

2) Image may be distorted when taking picture in a moving vehicle.

Zoom IN and OUT:

AHDVC01F has 3X zoom.

Zoom in or out by pressing the ▲or ▼ button.

STEP 4. Playback Photographs / Videos Clips :

) or video

1. Press the PLAYBACK (

mode, press (

) again to select either PHOTO / VIDEO.

How to upload to Youtube from MediaImpression:

1. Select the video that you like to upload

3. Complete your YouTube

2. Click on the YouTube icon in menu bar

account information

4. Fill in the video info and click "Upload"

Warranty

Aluratek warrants this product against defect in material or workmanship for 1 Year

from the date of purchase.

This warranty becomes invalid if the factory-supplied serial number or "warranty void"

sticker has been removed or altered on the product.

This warranty does not cover:

A) Cosmetic damage or damage due to acts of God

B) Accident, misuse, abuse, negligence or modification of any part of the product.

C) Damage due to improper operation or maintenance, connection to improper equipment,

or attempted repair by anyone other than Aluratek.

D) Products sold AS IS or WITH FAULTS.

IN NO EVENT SHALL ALURATEK'S LIABILITY EXCEED THE PRICE PAID FOR THE

PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL

DAMAGES RESULTING FROM THE USE OF THE PRODUCT, IT'S ACCOMPANYING

SOFTWARE, OR IT'S DOCUMENTATION.

Aluratek makes no warranty or representation, expressed, implied, or statutory, with

respect to it's products, contents or use of this documentation and all accompanying

software, and specifically disclaims it's quality, performance, merchantability, or fitness for

any particular purpose. Aluratek reserves the right to revise or update it's product, software

or documentation without obligation to notify any individual or entity.

) to take a close up photo-

button to

REC

) button once to enter the photo / video playback