Alutech CUL11 Panduan Koneksi dan Pengoperasian - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Koneksi dan Pengoperasian untuk Unit Kontrol Alutech CUL11. Alutech CUL11 20 halaman.

WARRANTy LIAbILITIES

Transportation may be carried out by means of any roofed land vehicle providing crush and

disposition protection inside it.

Disposal is carried out according to the current waste processing and disposal regulations

applicable in the country of the Customer. The product does not contain precious metals

and substances that pose hazard to life, people's health and environment.

WARRANTy LIAbILITIES

1. Normal operation of the product is guaranteed while meeting the rules of its storage,

transportation, adjustment, operation; while performing installation and technical

maintenance (timely and adequate) by the organisation specialised in automation

systems and authorised to perform installation and technical maintenance.

2. Warranty period is ________________ and starts from the date of delivery of the product

to the Customer or from the date of manufacture, if the date of delivery is unknown.

3. Manufacturing faults that occur during the warranty period are eliminated by the service

department that performs warranty maintenance.

Note:

parts replaced under the warranty become the property of the service department that

performed the product repair.

4. Warranty on the product is not valid in the following cases:

•

violation of rules of storage, transportation, operation and product installation;

•

installation, adjustment, repair, reset or modification of the product by persons

unauthorised to perform these works;

•

damage of the product caused by the instability of supply line or non-compliance of

mains supply parameters with the values, established by the Manufacturer;

•

damage of the product caused by water penetration;

•

force majeure (fire, lightning stroke, floods, earthquakes and other natural disasters);

•

damage of the product construction caused by the Customer or third party;

•

faults and defects caused by the absence of scheduled technical maintenance and

inspection of the product;

•

failure to provide a completed (filled-in) manual.

INSTALLATION AND OPERATION MANUAL | CUL11 CONTROL UNIT