ALUZ ZIBI A1 Series Manual - Halaman 8
Jelajahi secara online atau unduh pdf Manual untuk Peralatan Pencahayaan ALUZ ZIBI A1 Series. ALUZ ZIBI A1 Series 11 halaman. Surface zuco pivot bios illuminated
Juga untuk ALUZ ZIBI A1 Series: Panduan Petunjuk Instalasi (12 halaman), Manual (11 halaman), Manual (13 halaman), Panduan Petunjuk Instalasi (11 halaman)
Halaman Cetak8
After wiring connections are made and Cover Plate with Rod is
mounted, insert luminaire onto the arms and secure with set screws.
9
Connect luminaire to remote driver power source and test that
lighting is in working order.
1170 N Red Gum St, Anaheim, CA 92806
aluz.lighting
© ALUZ All Rights Reserved. ALUZ reserves the right to make changes or withdraw specifi cations without prior notice.
A1 Series | Surface
ZUCO Pivot BIOS Illuminated
(A1-ZUCO-PVT-BIOS)
866.ALUZ.LTG | 714.535.7900
10
After lighting is securely mounted and confi rmed to be working,
adjust to desired angle. Remove blue tape and tilt luminaire to
desired angle, then secure on both sides with set screws. Use an
angle fi nder to ensure accuracy across installation.
Note: Tighten set screws to secure luminaire angle. Do not remove
or over-tighten set screws.
Page 8 of 11
Mounting Arm (2 of 2)
(A1-ZUCO-PVT-EC-AA-X)
Installation Instructions
8 / 9 / 2023 / Rev 0