Alva GFP101 Manual - Halaman 8

Jelajahi secara online atau unduh pdf Manual untuk Pemanas Alva GFP101. Alva GFP101 13 halaman. Log heater

Halaman Cetak

Connection

in assembly

Foamy

bubbles

indicate a

leak

Connections to be leak tested

Regulator into cylinder

Hose to regulator

Hose to appliance

Fig.F

USING YOUR HEATER

This heater can be regulated to two different heat selections:

LOW

Open the cylinder valve by turning the cylinder valve to the left

(anti-clockwise).

Press the control know down at the 'OFF' position. Hold the

control knob down for ±10-20 seconds.

While holding it down, turn the control knob anti-clockwise to ignite

the pilot flame. Then push the ignitor button, the heater should make

a click sound and you should see a spark. The pilot flame should

ignite. Once the pilot flame ignites hold down the knob for another

±10-20 seconds then select your desired setting.

If the log heater does not ignite first time, repeat steps 2 and 3 above.

This log heater must be turned off using the control knob first, and

only then closing the the cylinder valve.

This heater has a positive off valve. Use the control knob to turn it

OFF before closing the cylinder valve.

LEAK TEST

Fig.F

(2582)

086 100 ALVA

How to do

a leak test

http://www.

youtube.com

/watch?v=8L

pZ1B0m23Y

&feature=plcp

FOR YOUR SAFETY

IF YOU SMELL GAS

Turn off the gas

supply at the

gas cylinder

Extinguish all

DO NOT operate

any electrical

appliances.

Ventilate the

area.

Check for leaks

(see LEAK TEST)

If odour per-

sists, contact

your dealer or

local gas supplier

immediately.

PILOT