Alvarado MSGX-E Panduan Petunjuk Pemasangan dan Pemeliharaan - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pemasangan dan Pemeliharaan untuk Pagar & Gerbang Alvarado MSGX-E. Alvarado MSGX-E 20 halaman. Full height maximum security gate
Halaman CetakTools Required
•
Heavy Duty Drill or Rotary Hammer
•
5/8" Concrete Drill Bit
•
Torque Wrench (ft-lbs)
•
Shop Vac
Parts List
•
Gate in frame
•
This installation guide
•
Power supply (for select models)
•
Push bar or handle (optional)
Installation Overview
The overall steps to correctly install the Maximum Security Pedestrian Gate are below:
1) Determine gate location; taking into account power and activation wiring stub requirements (if applicable).
2) Anchor the gate and attach the closing arm hinge.
3) Connect activation wiring (if applicable).
4) Connect low-voltage power (if applicable).
Slab Requirements
The must be installed on a level concrete pad with a minimum thickness of 4 inches.
WARNING
DO NOT INSTALL ON ASPHALT.
Page 6
For Assistance: [email protected] +1 (909) 591-8431
MSG Installation and Maintenance Instructions
•
Tape Measure
•
Chalk Line
•
Safety Glasses
•
Anchor package:
•
3/8" anchors (2" length - Qty 8)
•
3/8-16 x 2 1/2" HHSC (Qty 8)
•
3/8" Flat washers (Qty 8)
PUD1201R5-0