Alvarion BreezeACCESS II Brosur & Spesifikasi - Halaman 3
Jelajahi secara online atau unduh pdf Brosur & Spesifikasi untuk Titik Akses Nirkabel Alvarion BreezeACCESS II. Alvarion BreezeACCESS II 4 halaman. Broadband wireless access system
Juga untuk Alvarion BreezeACCESS II: Catatan Rilis (3 halaman), Catatan Rilis (6 halaman)
Halaman Cetak
BreezeACCESS II provides a Base Station and three types of Access
Units, delivering superior flexibility in architecture and network
deployment.
All Access Units are connected to the subscriber's data equipment
via a standard IEEE 802.3 Ethernet 10BaseT (RJ 45) interface.
The 19" Base Station shelf
(BS-SH) can hold up to six
BS-AU modules, providing
reliable access to maximum
numbers of subscribers.
The BS-AU modules can be synchronized to ensure optimal utilization
of the available frequency spectrum.
In addition, the Base Station shelf includes up to two redundant power
supply modules, which are served by either a -48 VDC or a 110/220
VAC power source.
A GPS synchronization system allows accurate synchronization of
BreezeACCESS base stations located on different sites.
The BreezeACCESS II indoor/outdoor
Access Unit configuration includes
an indoor module and outdoor unit
that contains the radio and antenna
units. Data, power, management
and control signals are transmitted
from the indoor unit to the outdoor
unit via a coaxial cable.
The indoor/outdoor Access Units are available
with either 26dBm (HP-High Power) or 2dBm (LP-Low Power)
output power at the antenna port.
Base Station Shelf
BS-SH
BS-SH-AC
Outdoor Access
AU-A-BS-2.4
Units for use
with Base Station
AU-E-BS-2.4
Stand-alone
AU-E-NI-2.4
Access Point
Power Supply
BS-PS
BS-PS-AC
GPS
GU-A-BS
Synchronization
System
Base station chassis with
one DC power supply
Base station chassis with
one AC power supply
Includes base station module and
outdoor unit with integrated antenna
Includes base station module and
outdoor unit with connectors for
external antenna
Includes indoor unit and outdoor unit
with connectors for external antenna
Base station DC power supply
Base station AC power supply
Includes synchronization
card and outdoor GPS radio
unit with integrated antenna
The outdoor units feature two antenna options, as follows:
•
Comprise an indoor module and outdoor unit,
which contains a radio unit and integrated panel antenna.
•
Feature an indoor module and outdoor unit,
which contains a radio unit and an RF connector for a separate
external antenna.
Optimized for indoor installations, the miniature
indoor units are designed to fit on a desktop
or mounted on the wall and are powered from
the mains (100-250 VAC).
The indoor Access Units (AU-ID) include two RF connectors for
detached diversity antennas.
The Micro Cell Access Units are stand-alone modules that connect
to the same outdoor units as described in the Indoor/Outdoor
Access Units configuration. The indoor units are designed to fit
on a desktop or mount on the wall and are powered from the
mains. Data, power, management and control signals are transmitted
from the indoor unit to the outdoor unit via a coaxial cable.
The outdoor units feature two antenna options, as follows:
•
Comprise an indoor module and outdoor unit,
which contains a radio unit and integrated antenna.
•
Feature an indoor module and outdoor unit,
which contains a radio unit and an RF connector for a separate
external antenna.
SU-A-BD
SME/SOHO
SU-A-1D1V
Residential