DLS CLASSICAMPENG03 Cara Memasang dan Mengoperasikan - Halaman 11
Jelajahi secara online atau unduh pdf Cara Memasang dan Mengoperasikan untuk Penguat Mobil DLS CLASSICAMPENG03. DLS CLASSICAMPENG03 16 halaman.
Halaman Cetak
Speaker wiring CA 50
Four fullrange speakers to CA50. One pair in
front and one pair in rear.
Rear speakers
Filter settings A/B Channels
HPF
50Hz 220Hz
15Hz 500Hz
Off On
With the HPF-filter in OFF position the amplifier
allows the speakers to play fullrange. If you for
some reason want to limit the low bass
reproduction switch on the HPF-filter. The typical
setting is then around 60 – 80 Hz.
The LPF-filter switch should be in OFF-position
Filter settings C/D Channels
HPF
Multiply
50/500Hz 220/2(k)Hz
Off On
x1 x10
15/150Hz 500/5(k)Hz
With the HPF-filter in OFF position the amplifier
allows the speakers to play fullrange. If you for
some reason want to limit the low bass
reproduction switch on the HPF-filter. The typical
setting is then around 25 – 40 Hz.
The LPF-filter switch should be in OFF-position
Front speakers
LPF
Multiply
80/800Hz
200/2(k)Hz
x1 x10
Off On
50/500Hz 500/5(k)Hz
LPF
80Hz 200Hz
50Hz 500Hz
Off On
Subwoofer to CA50
The CA50 is a five channel amplifier. On channel
A, B, C &D the filter confoguration is exactly the
same as for CA40. For speaker connections on
these channels you can use the examples for CA40.
Channel E is a subwoofer mono channel with a
lowpass filter adjustable from 50 to 500 Hz. Channel
E has also a subsonic filter that can be switched
IN-OUT. The subsonic filter has a fixed frequency
of 25 Hz.
You can connect one 4 ohm subwoofer to channel
E.
Filter settings E Channel
The subsonic filter takes away the very deepest
frequencies. Turn on the subsonic filter if you want
to remove these frequencis.
The LPF will allow low frequencies only and blocks
higher frequencies. A typical setting is 70 – 100 Hz.
CA50
11