AIO ZEUS Panduan Memulai Cepat
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Printer 3D AIO ZEUS. AIO ZEUS 2 halaman.
Juga untuk AIO ZEUS: Panduan Memulai Cepat (2 halaman)
Halaman Cetak
Z E U S
QUICK-START GUIDE
A
Getting started
1
Cut straps
4
4
Open door by lifting up and back
7
Insert power cable in back, switch on
10
Wind excess back onto spool
Squeeze tabs with
thumb and index
13
Feed filament all the way down
Recommended: start with a test
16
Select a file
All manuals and user guides at all-guides.com
2
Remove all four plastic tabs
Remove
test printout
5
Remove interior packaging
8
Press front on button for 1 second
11
Press control button
14
Prep plate with thin layer of glue
17
Select print
3
Lift box + remove packaging
6
Place turnable 3 pins facing down
9
Unwrap filament and feed through tube
12
Press park button
15
Press print to access files
NB: "Box" test file print time:
> 8 mins
18
Lift glass plate then remove printout