10 Bar LUMIX LX3 Panduan Pengguna - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori Kamera 10 Bar LUMIX LX3. 10 Bar LUMIX LX3 9 halaman. Camera underwater housing for panasonic lumix lx3
(4) CURSOR - rotate until the white dot is over the required direction and press, when not in use rotate the
white dot towards the screen to facilitate the ¡ AF/AE LOCK / Menu/Set¡ function.
(5) ASPECT RATIO -rotate to select the required ratio.
(6) MODE DIAL - press down and turn to select the required mode.
(7) SHUTTER / ZOOM - press to activate the shutter, turn to activate the zoom function.
(8) ON / OFF - align the white dot towards the lid, press and turn to on or off.
(9) JOYSTICK - move the control to the opposite direction of the arrow shown on the screen.
(10) DISPLAY / DELE - rotate until the white dot align and press.
(11) REC / PLAYBACK - press and turn to select.
(12) AF /AE LOCK / MENU / SET - rotate until the white dot align and press, when not in use rotate the
white dot until pointing downward to facilitate the ¡cursor¡ function .
For the full list of camera functions and settings accessed by each control, please consult the
Panasonic LX3 camera instruction manual.
4. Set up Instructions
4.1 Special note on responsibility for watertight integrity
Each housing is individually inspected and hydrostatically tested in the factory. The design of the main
piston O-ring seal is among the most reliable in the industry and the watertight integrity is excellent. This
special O-ring design provides a perfect seal even if there is any movement between the body and lid due
to change of ambient pressure. However please note that responsibility for ensuring the integrity of the
watertight seal lies entirely with the user. 10BAR accepts no liability for damage to, or loss of any
equipment used with, or placed inside the housing. Users are highly recommended to carry out in-water
test of the housings without installing of the camera for their first dive, after change of new ports or
alternation of any new configuration. The test can be carried out by lowering the housing with ballast to
the working depth or dive down to the safe diving range.
The O-ring seal is the main barrier between the water outside
and the air space within the camera. It is an effective barrier
only if the seal is properly maintained. The O-ring seal should
be inspected before every dive. The following information is
provided for guidance in using and maintaining the O-ring
seal.
3