ACP AXP22QT Lembar Instruksi - Halaman 4

Jelajahi secara online atau unduh pdf Lembar Instruksi untuk Peralatan Makanan Komersial ACP AXP22QT. ACP AXP22QT 6 halaman.

5. Left Side of Oven

a) Remove 3 screws from LH partition panel and remove panel - see figure 7.

b) Remove terminal block mounting screw.

c) Remove grounding nut and ground wire, then remove ground lug from base.

Remove secondary interlock switch assembly by removing screw and sliding switch off

of hinge .

Terminal

Block Screw

Partition Panel

Screw

Ground Lug

e) Remove secondary interlock switch mounting bracket cover by removing two cover

screws and lifting cover off of secondary - see figure 8.

Important: Note the position of the alignment tab before removing cover bracket.

ACP, Inc.

225 – 49TH Avenue Drive SW

Cedar Rapids, IA 52404

Partition Panel

Screw

Figure 7

Cover Screws

Alignment Tab

Figure 8

Partition Panel

Screw

Secondary Interlock

Screw

PART #: 16200051

REV. 1

DATE: 9-6-12

Page 4 OF 6