3M Multimedia Projector MP8660 Panduan Memulai Cepat - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Proyektor 3M Multimedia Projector MP8660. 3M Multimedia Projector MP8660 2 halaman.
Halaman CetakMP8660 Quick Reference Setup Instructions
Projector Packout
Lens Cap
MP8660 Projector
Remote Control
Transmitter
3-Conductor
VGA Cable
Video Cable
Video/Audio Cable
(15-15 pin M/M)
(S-Video mini DIN4-pin)
Remote Control Transmitter
Press STANDBY/ON to switch projector between projection and standby mode. In
projection mode the lamp is ON. In standby mode the lamp is OFF.
Press BLANK to display a black background with no image. Press again to return the
image to the screen.
Press MUTE to switch the audio sound ON or OFF.
Press ZOOM (YB) to increase or decrease the size of the screen image.
Press FOCUS (YB) to increase or decrease the sharpness of the screen image.
Press VOLUME (YB) to adjust internal/external speaker volume.
Press BACK LIGHT to light the remote buttons.
Press RGB to switch computer video input (RGB1
Press MENU to display the on–screen menus. Move the mini–joy stick up/down or
left/right as needed to nagivate the menu options. Note: Press SELECT to choose the
option that is highlighted.
Press SELECT (L) to choose the highlighted menu option. Refer to On–Screen Menus in
Section 4.
Press RESET to reset menu options to the factory default setting. Refer to On–Screen
Menus in Section 4.
Press VIDEO to switch between video inputs (VIDEO1
Power Cord
PS/2 Adaptor
MAC Adaptor
(US, Euro, UK)
Cable
Serial Mouse
Gender
RCA to Stereo
Cable
Changer
mini jack
RGB2
RGB1).
VIDEO2
VIDEO1).
Projector Operation
When all cable connections are complete, turn on the projector
power first, then the power to the input sources.
1. Turn projector power "ON." Main power switch is located on
backside of projector.
2. Remove lens cap.
3. Press the STANDBY/ON button. Power indicator turns
from amber to green
4. Power up input devices.
5. Press the RGB or VIDEO button to select input device.
ADB Adaptor
Cable
6. Press the ZOOM +/– button to adjust image size.
7. Press the FOCUS +/– button to adjust image sharpness.
8. Press the VOLUME +/– button to adjust speaker volume.
9. Press the MENU button to display and SELECT arrows to
select menu options.
10. To shutdown projector, press STANDBY/ON button. Power indicator
will turn from green to amber.
Hexagon
Wrench
Navigating System Menus
Press the MENU button on the projector control panel or remote
control keypad to display the Main Menu. Press the up/down
YB
arrows
or move the mini–joy stick up/down to move
vertically within a menu, sub–menu or adjustment screen.
Press the left/right select arrows
panel or move the mini–joy stick left/right to move horizontally
within a sub–menu or adjustment screen.
Press the SELECT button on the control panel or the SELECT (L)
button on the remote to enter a selected adjustment screen.
RGB ONLY
BRIGHTNESS
SETUP
CONTRAST
IMAGE
POSITION
OPTION
PHASE
H SIZE
MAC MODE
MIRROR
SETUP
IMAGE
NORMAL
OPTION
H INVERT
V INVERT
H&V INVERT
LENS RETRACT
SETUP
AUTO
IMAGE
MANUAL
OPTION
SPECIAL
TEST SCREEN
FIRMWARE REV.
SVGA56
H XX.X KhZ
V XX.X KhZ
A "
on the projector control
VIDEO ONLY
BRIGHTNESS
CONTRAST
COLOR
TINT
MESSAGE
ON
OFF
LANGUAGE
BEEP
AUTO OFF
ENGLISH
ON
YES
FRENCH
OFF
NO
SPANISH
GERMAN
LANGUAGE
LAMP TIMER
PANEL
BOTH
FRONT
BLUE
00
1000 Hours
REAR
GREEN
00
Projector Control Panel