AERMEC ANK Panduan Instalasi - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Pendingin AERMEC ANK. AERMEC ANK 14 halaman.

7. LIST OF CONTROLS FOR THE GUIDED

PROCEDURE

How to modify a parameter in the user menu:

To enter the USER menu press the key shown in (Fig.A). Once the key

has been pressed the password must be inserted for access to the various

menus. To access the user menu the password is 000 (which is the de‐

fault displayed); to modify the value of the password use the arrow keys.

Once the correct password has been inserted, press the key shown in

(Fig.A). The display shows the index of the USER parameter and a string

of three characters that identify it. The string remains displayed for one

second, after which it is replaced by the value relative to the parameter

itself. To pass to the next parameter, use the arrow keys (Fig.B). To mod‐

ify a parameter, just select it, press the key shown in (Fig.A), modify the

value using the arrow keys shown in (Fig.B). To confirm the modification

press the key shown in (Fig.A) again.

How to modify a parameter in the installer menu:

To enter the INSTALLER menu, press the key shown in (Fig.A).Once the

key has been pressed the password must be insertedfor access to the

various menus. To access the user menu the password is 030. To

modify the value of the password use thearrow keys. Once the correct

password has been inserted, press the key shown in (Fig.A). The dis‐

play shows the index of the INSTALLER parameter and a string of three

characters that identify it. The string remains displayed for one sec‐

ond, after which it is replaced by the value relative to the parameter

itself. To pass to the next parameter, use the arrow keys (Fig.B). To

modify a parameter, just select it, press the key shown in (Fig.A), mod‐

ify the value using the arrow keys shown in (Fig.B). To confirm the

modification press the key shown in (Fig.A) again.