aion Lab Series Manual - Halaman 3
Jelajahi secara online atau unduh pdf Manual untuk Penguat aion Lab Series. aion Lab Series 20 halaman.
Juga untuk aion Lab Series: Manual (15 halaman), Manual (20 halaman)
USAGE
The L5 Preamp has the following controls:
Channel 1
• Bright (toggle switch) adds a treble-bleed capacitor to the volume control, which preserves some of
the treble at lower volume levels to keep it from getting dull.
• Treble, Mid and Bass form a standard Fender-style 3-band passive EQ.
• Volume controls the amount of gain in the first stage, before the EQ and drive section.
Channel 2
• Bright (toggle switch) adds a treble-bleed capacitor to the volume control, which preserves some of
the treble at lower volume levels to keep it from getting dull.
• Volume controls the amount of gain in the first stage, before the EQ and drive section.
• Treble and Bass form a standard 2-band Baxandall control. Each band is flat at the 12:00 position,
and can either cut (CCW) or boost (CW).
• Mid boosts (CCW) or cuts (CW) the midrange frequency selected by the Frequency control.
• Frequency selects the frequency that will be boosted or cut by the Mid control, from 100 Hz at full
CCW to 6.4kHz at full CW.
Both channels
• Multifilter blends a six-band fixed EQ boost, adding harmonics to the instrument signal.
• Multifilter Channel (toggle) moves the multifilter between channel 1 or channel 2.
• Master sets the output volume after the drive section of the preamp.
• Limit sets the threshold of the compressor at the end of the circuit.
• Comp (toggle) engages or disengages the compressor.
L5 PREAMP
3