Blucave TDD-10 Petunjuk Asli - Halaman 2

Jelajahi secara online atau unduh pdf Petunjuk Asli untuk Bor Blucave TDD-10. Blucave TDD-10 2 halaman.

Halaman Cetak

TECHNICAL DATA

Drill Driver

MODEL: TDD-10

Voltage

18V

No Load Speed

0-550 min

-1

Chuck

10mm

Capacity Timber

20mm

Capacity Metal

10mm

Weight

0.78Kg

BluCave tools are for private use only and are not suitable

for commercial / professional / continuous use.

Measured values determined according to EN 60745

Typically the A-weighted noise levels of the product are:

Sound Pressure Level L

64.45 dB(A)

Sound Power Level L

75.5 dB(A)

Uncertainty K

3 dB(A)

Uncertainty K

3 dB(A)

Wear Hearing Protection!

The sound intensity level for the operator may exceed

85dB(A) and sound protection measures are necessary.

Vibration total values (triaxial vector sum) determined

according to EN 60745

Drilling into

Vibration emission value a

= 0.81 m/s

h,D

Metal

Uncertainty K =1.5 m/s

The values given are valid for nominal voltages of 18V.

For lower voltage and models for specific countries

these values can vary.

The declared vibration total value has been measured

in accordance with a standard test method and may be

used for comparing one tool with another.

The declared vibration total value may also be used in

a preliminary assessment of exposure. The vibration

emission during actual use of the power tool can differ

from the declared total value depending on the ways

in which the tool is used. Safety measures to protect

the operator should be identified that are based on an

estimation of exposure in the actual conditions of use

(taking account of all parts of the operating cycle such

as the times when the tool is switched off and when it

is running idle in addition to the trigger time).

BLUCAVE.COM

TDD-10-EU-EN REV 07

DC_Drill TDD-10 EU EN REV 07.indd 2

Symbols

The following symbols are important for reading and un-

3. PERSONAL SAFETY

derstanding the operating instructions. Please take note

a. Stay alert, watch what you are doing and use common

of the symbols and their meaning. The correct interpre-

tation of the symbols will help you to use the machine in

a better and safer manner.

WARNING - To reduce the risk of injury during

operation, always read the instructions.

b. Use personal protective equipment. Always wear eye

Always wear hearing protection. The effects of noise

9 12 15 18

can cause hearing loss.

Always wear a dust mask. When working with wood

and other materials, harmful dust may be generated.

Work with asbestos containing materials is not

c. Prevent unintentional starting. Ensure the switch is

permitted!

Always wear safety glasses. When working with

electric power tools, sparks, splinters, chips and dust

particles may be generated and these can cause loss of

sight

d. Remove any adjusting key or wrench before turning

GENERAL POWER

e. Do not overreach. Keep proper footing and balance at

TOOL SAFETY

f. Dress properly. Do not wear loose clothing or jewellery.

WARNINGS

WARNING Read all safety warnings and all

g. If devices are provided for the connection of dust

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and instructions for future reference.

The term "power tool" in the warnings refers to your

4. POWER TOOL USE AND CARE

mains-operated (corded) power tool or battery-operated

a. Do not force the power tool. Use the correct power

(cordless) power tool.

1. WORK AREA SAFETY

a. Keep work area clean and well lit. Cluttered or dark

b. Do not use the power tool if the switch does not turn

areas invite accidents.

b. Do not operate power tools in explosive atmospheres,

such as in the presence of flammable liquids, gases or

c. Disconnect the plug from the power source and/or the

dust. Power tools create sparks which may ignite the

dust or fumes.

c. Keep children and bystanders away while operating a

power tool. Distractions can cause you to lose control.

2. ELECTRICAL SAFETY

d. Store idle power tools out of the reach of children and

a. Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with

earthed (grounded) power tools. Unmodified plugs and

matching outlets will reduce risk of electric shock.

e. Maintain power tools. Check for misalignment or

b. Avoid body contact with earthed or grounded surfaces,

such as pipes, radiators, ranges and refrigerators.

There is an increased risk of electric shock if your body

is earthed or grounded.

c. Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of

f. Keep cutting tools sharp and clean. Properly

electric shock.

d. Do not abuse the cord. Never use the cord for carrying,

pulling or unplugging the power tool. Keep cord away

g. Use the power tool, accessories and tool bits etc.

from heat, oil, sharp edges or moving parts. Damaged

or entangled cords increase the risk of electric shock.

e. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of electric

shock.

f. If operating a power tool in a damp location is

5. BATTERY TOOL USE AND CARE

unavoidable, use a residual current device (RCD)

a. Recharge only with the charger specified by the

protected supply. Use of an RCD reduces the risk of

electric shock.

battery pack may create a risk of fire when used with

another battery pack.

b. Use power tools only with specifically designated

battery packs. Use of any other battery packs may

sense when operating a power tool. Do not use a power

create a risk of injury and fire.

tool while you are tired or under the influence of drugs,

c. When battery pack is not in use, keep it away from

alcohol or medication. A moment of inattention while

other metal objects, like paper clips, coins, keys,

operating power tools may result in serious personal

nails, screws or other small metal objects, that can

injury.

make a connection from one terminal to another.

Shorting the battery terminals together may cause

protection. Protective equipment such as dust mask,

burns or a fire.

non-skid safety shoes, hard hat, or hearing protection

d. Under abusive conditions, liquid may be ejected from

used for appropriate conditions will reduce personal

the battery; avoid contact. If contact accidentally

injuries.

occurs, flush with water. If liquid contacts eyes,

additionally seek medical help. Liquid ejected from the

in the off-position before connecting to power source

battery may cause irritation or burns.

and/or battery pack, picking up or carrying the tool.

6. SERVICE

Carrying power tools with your finger on the switch or

energising power tools that have the switch on invites

a. Have your power tool serviced by a qualified repair

person using only identical replacement parts. This will

accidents.

ensure that the safety of the power tool is maintained.

the power tool on. A wrench or a key left attached to a

rotating part of the power tool may result in personal

injury.

DRILL SAFETY WARNINGS:

all times. This enables better control of the power tool

• Use auxiliary handle(s), if supplied with the tool. Loss

in unexpected situations.

of control can cause personal injury.

• Hold power tool by insulated gripping surfaces, when

Keep your hair, clothing and gloves away from moving

performing an operation where the cutting accessory

parts. Loose clothes, jewellery or long hair can be

may contact hidden wiring or its own cord. Cutting

caught in moving parts.

accessory contacting a "live" wire may make exposed

metal parts of the power tool "live" and could give the

extraction and collection facilities, ensure these are

operator an electric shock.

connected and properly used. Use of dust collection

• When working with the machine, always hold it firmly

can reduce dust-related hazards.

with both hands and provide for a secure stance. The

power tool is guided more secure with both hands.

• If operation is dusty, also wear a dust mask.

• Use appropriate detectors to determine if utility lines

tool for your application. The correct power tool will

are hidden in the work area or call the local utility

do the job better and safer at the rate for which it was

company for assistance. Contact with electric lines

designed.

can lead to fire and electric shock. Damaging a gas line

can lead to explosion. Penetrating a water line causes

it on and off. Any power tool that cannot be controlled

property damage or may cause an electric shock.

with the switch is dangerous and must be repaired.

• Switch off the power tool immediately when the tool

insert jams. Be prepared for high reaction torque that

battery pack from the power tool before making any

can cause kickback.

adjustments, changing accessories, or storing power

—The tool insert jams when:

tools. Such preventive safety measures reduce the risk

The power tool is subject to overload OR

of starting the power tool accidentally.

It becomes wedged in the workpiece.

• Secure the workpiece. A workpiece clamped with

do not allow persons unfamiliar with the power tool or

clamping devices or in a vice is held more secure than

these instructions to operate the power tool. Power

by hand.

tools are dangerous in the hands of untrained users.

• Hold the machine with a firm grip. High reaction

torque can briefly occur while driving

binding of moving parts, breakage of parts and any

• Keep your workplace clean. Blends of materials are

other condition that may affect the power tool's

particularly dangerous. Dust from light alloys can burn

operation. If damaged, have the power tool repaired

or explode.

before use. Many accidents are caused by poorly

• Always wait until the machine has come to a complete

stop before placing it down. The tool insert can jam

maintained power tools.

and lead to loss of control over the power tool.

maintained cutting tools with sharp cutting edges are

• Never use the machine with a damaged cable. Do not

less likely to bind and are easier to control.

touch the damaged cable and pull the mains plug when

the cable is damaged while working. Damaged cables

in accordance with these instructions, taking into

increase the risk of an electric shock.

account the working conditions and the work to

• This appliance is not intended for use by persons

be performed. Use of the power tool for operations

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience and

different from those intended could result in a

hazardous situation.

knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a

person responsible for their safety. Children should

be supervised to ensure that they do not play with the

manufacturer. A charger that is suitable for one type of

appliance.

• This appliance is not intended for use by young

children or infirm persons. Adequate supervision by a

responsible person must be provided to ensure that

they do not play with the appliance.

• Keep children and visitors away. Visitors should wear

safety glasses and be kept a safe distance from work

area. Do not let visitors contact tool or extension cord.

• Do not open the battery. Danger of short-circuiting.

• Protect the battery against heat, e. g., also against

continuous sun irradiation and fire. There is danger of

explosion.

• In case of damage and improper use of the battery,

vapours may be emitted. Provide for fresh air and seek

medical help in case of complaints. The vapours can

irritate the respiratory system.

• When the battery is defective, liquid can escape and

come into contact with adjacent components. Check

any parts concerned. Clean such parts or replace them,

if required.

• Use the battery only in conjunction with your BluCave

power tool. This measure alone protects the battery

against dangerous overload.

WARNING Read all safety warnings designated by the

• Dusts from materials such as lead-containing

symbol and all instructions.

coatings, some wood types, minerals and metal can be

harmful to one's health and cause allergic reactions,

lead to respiratory infections and/or cancer.

Materials containing asbestos may only be worked by

specialists.

• Before any work on the machine (e. g., maintenance,

tool change, etc.) as well as during transport and

Storage, set the rotational direction switch to the

centre position. Unintentional actuation of the On/Off

switch can lead to injuries.

• Apply the power tool to the screw only when it is

switched off. Rotating tool inserts can slip off.

• Wear ear protectors. Exposure to noise can cause

hearing loss.

Distributed by:

We, the undersigned Batavia GmbH, Blankenstein 180,

NL-7943PE Meppel, declare by our own responsibility

that the product Drill Driver, Item-No 7060536, Model Nr.

Is according to the basic requirements, which are defined

in the European Directives Electromagnetic Compatibility

Is according to the basic requirements, which are defined

in the European Directives, European Machinery Directive

• Provide for good ventilation of the working place.

• It is recommended to wear a P2 filterclass

respirator.

• Observe the relevant regulations in your country for

the materials to be worked.

Batavia GmbH

Blankenstein 180

7943 PE Meppel - Netherlands

Office phone: +31 (0) 522 820200

www.batavia.eu

EC-Declaration of conformity

TDD-10-1:

2004/108/EC (EMC).

2006/42/EC.

For the evaluation of conformity, the following

harmonized standards were consulted:

EN 60745-1: 2009+A11, EN 60745-2-1: 2010,

EN 55014-1:2006/A2:2011,

EN 55014-2:1997/A2:2008,

EN 61000-3-2:2006/A1:2009, EN 61000-3-3:2008

Meppel, 01 september 2011

Meino Seinen, QA Representative

Batavia GmbH, Blankenstein 180,

7943 PE Meppel, Netherlands

22/06/2004 2:00:33 AM