DNF Controls 4000CL-MAV-T-PBIO Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kartu Jaringan DNF Controls 4000CL-MAV-T-PBIO. DNF Controls 4000CL-MAV-T-PBIO 20 halaman. 250 clip fast access system with peripheral bus interface option for sony mav-555 video servers
Juga untuk DNF Controls 4000CL-MAV-T-PBIO: Panduan Pengguna (20 halaman)

Halaman Cetak
7.

LEARN ON THE PRODUCTION SWITCHER

a.
Select and enable the Peripheral Device Addresses for the ST300.
b.
Do a LEARN to the desired REGISTER. The ST300 will: LEARN (save) the VTR#,
loaded CLIP ID and current IN time to the REGISTER number in the ST300.
8.

RECALL ON THE ST300

a.
Select the desired Cue Point by pressing [NEXT CUE], [LAST CUE].
OR
By manually entering the Cue Point using the numeric keypad.
The selected Cue Point number is shown on the bottom line of the display.
b.
Press [LOAD] on the ST300. The ST300 will automatically load the LEARNED clip on
the selected VTR and cue the clip to the LEARNED time.
9.

RECALL ON THE PRODUCTION SWITCHER

a.
RECALL the desired REGISTER NUMBER.
b.
The ST300 will automatically load the Learned clips on the Learned VTRs, cue the clips
to the Learned time, then set the Learned GANG mode.
8 4000CL-MAV, 250 Clip Fast Access System, for Sony MAV-555, with PBIO option