Blue Coat AV210 Panduan Memulai Cepat - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Firewall Blue Coat AV210. Blue Coat AV210 8 halaman.
Halaman Cetak4. Use a Serial Console to Configure Initial Settings
To access the serial console:
1. Configure the terminal or PC terminal emulation software as follows:
• Baud rate:
• Parity:
• Flow control:
2. Upon power up, the console displays a Boot Menu prompt. Do
within five (5) seconds to access the boot menu. After a short period, the system
prompts you with the following:
3. As instructed, press <Enter> three times to begin the initial configuration procedure.
Enter basic network information as prompted.
Document Number: 231-03007 Rev E.0 06/09
AV210 Quick Start Guide
9600 bps
none
none
Press "enter" three times to activate the serial console
• Data bits:
8
• Stop bits:
1
• Emulation: VT100
press any key
not
2