Dobinsons BU59-3706 Panduan Instalasi - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Aksesori Mobil Dobinsons BU59-3706. Dobinsons BU59-3706 10 halaman. Bullbar for toyota hilux revo 2015 on

Halaman Cetak

with the washers supplied in the original bolt

position.

16. Centralise the bracket to the vehicle and

tighten all fasteners.

17. Trim the original LH and RH vertical air dams

as seen in the photo below to clear the new

mounting bracket and bullbar.

18. Re-install the air dams to the vehicle.

19. Remove the plastic screw clips from the

original bumper mounts near the inner lower

corners of the headlights.

Dobinsons Springs and Suspension

20. Drill a small hole in the air damns just in front

of this to attach a cable tie to, and cable tie it

to stop movement.

21. Install the new grill support bracket. It is

recommended to remove the screw plug and

use a nut and bolt to tighten it correctly.

22. Re-install the grill inserting the centre 2 tabs

into the new bracket and re-install the upper

bolts and screws. It is also recommended to

drill a hole in the outer lower tabs on each

side at the base and cable tie to the holes

drilled in step 20 to secure the grill.