Dobrosfera Z10H Manual Petunjuk Perakitan - Halaman 4

Jelajahi secara online atau unduh pdf Manual Petunjuk Perakitan untuk Peralatan Konstruksi Dobrosfera Z10H. Dobrosfera Z10H 13 halaman.

Before proceeding with the assembly of the frame, prepare sawn OSB

elements,15 mm thick

drills for pre-drilling under

assembly.

During assembly, be sure to fix a frame ,

assembled horizontal tier

for

p recise positioning of beams and the braces of the frame for correct

convergence in the upper anchorage.

For installation of the cladding, please use galvanized screws 5х70 every 20 cm

perimeter.To drill 3 mm by 53 mm deep into the frame.

To piece together the

parts is required.

Nagel must be attached to the braces with bolts and nuts and with washers as

indicated in the instructions.

The frame must be fixed on metal plates on top of the pile with a bolt screw

from below through the head to the vertical beam with preliminary drilling with a

depth of 120-150 mm.

Attention! Be sure to read

this section before

assembling.

( map of pattern see below), a screws, a screwdriver and

s elf-tapping screws.

. The cladding, sawn exactly in size,

c onstituent elements

D obrosfera

, 2018. Version 3.0

A ll of this you will need during

s ecuring the cladding on each

o f the cladding,

us.dobrosfera.com

i s also a template

c onsisting of several