Aiper Orca 1200 Pro Panduan Pengguna - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penyedot Debu Kolam Renang Aiper Orca 1200 Pro. Aiper Orca 1200 Pro 16 halaman. Robotic pool cleaner
Halaman CetakThe pool filter system
The robot
and pump are running
does not
reach all
The cable is not long
pool areas
enough in the pool
The filter baskets need
The robot
to be cleaned
does not
The PVC rollers are worn
climb walls
or consumed too much
The power cord is not
plugged well
The robot is damaged
during transportation
The cleaner does not
The robot
match the local rated
does not
voltage
work
Electric Fault
The cleaner gets blocked
1.Check if the LED indicators
on the power supply unit
flash. If yes, it's probably
It just sits at
because it has completed the
the bottom
scheduled 1H working cycle
of the pool
(default time);
and won't
2.There is a blockage in the
move after
filter baskets;
several
3.The belt is broken;If the belt
passes
is fine, there should be wrong
with the motor, please
contact the customer service.
It spends all
its time in the
The pool shape is not
deep area
regular like ROUND/
without
OVAL/RECTANGULAR
visiting the
shallow area
Turn off the pool filter
system and pump
Release the cable
Clean and wash the filter
baskets
Replace new rollers
Plug the power cord
tightly
Contact the customer
service
Contact the customer
service
Contact the customer
service
Contact the customer
service
1.Reset the cleaning time
to 1H/2H/3H;
2.Clean up the filter
baskets and restart the
machine; Replace the
belts. (Note: Please don't
use the cleaner
immediately after
spraying pool chemicals,
otherwise it will break
belts easily)
Paste the included
floating blocks on the
shell surface (refer to
4.3 on the manual) to
widen the cleaning
coverage
9