Fleck 3200ET Panduan Servis - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Servis untuk Unit Kontrol Fleck 3200ET. Fleck 3200ET 12 halaman. Remote meter

3200ET Remote Meter

Installation and Start-Up Procedures (Cont'd.)

7. In normal operation the Time Of Day, and if flow meter equipped, Volume Remaining Displays alternate being

viewed. Set the Time Of Day Display by depressing the Up or Down Set Button to the correct time. (See Fig. 1)

For Example:

12:59 A.M.

(Valve in Service)

8. Remote Meters Only: The Volume Remaining Display is the volume of water (in gallons) remaining prior to

regeneration, including any reserve capacity. Without any water usage the Meter Arrow should be either off or on

but not changing. Open a soft water tap. The Meter Arrow should begin flashing at a rate that varies with flow rate.

Close the tap after 3 - 5 gallons of water flow.

For Example:

25 Gallons Of Water

Remaining

(Valve in Service)

(No Water Flow)

(Volume is below

reserve capacity,

Reserve Arrow

Flashing)

Printed in U.S.A.

Figure #1

For Example:

0 Gallons Of Water

Remaining

(Valve in Service)

(Water Flowing, Meter

Arrow Flashing))

(Volume is below

reserve capacity,

Reserve Arrow

Flashing)

Page 3