Dockin D Pure Panduan Pengguna - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Headphone Dockin D Pure. Dockin D Pure 19 halaman.
Halaman Cetak
CONTROLS
1
Short Press: Volume up / Long Press: Next Track
2
Multifunctions Button / Pairing Button
3
Short Press: Volume down / Long Press: Previous Track
4
Status LED
5
Micro-USB Charging Port
AUX Input
6
Power Switch
7
Power Status LED
8
12
PAIR YOUR HEADPHONE:
•
Slide the power switch
up).
•
Then press the multifunction button
1
Sec.) and the headphones switch to pairing mode. A signal tone
is now heard and the status led fl ashes alternately red and blue!
2
•
Turn on your mobile device and enable bluetooth to connect it
3
to your new headphone.
4
5
STANDBY MODE:
Your headphones will switch to standby mode after 15min of idle
6
time!
•
Press the multifunction button
7
to turn the headphones back on and automatically start them
8
with your already paired mobile device.
UNPAIR YOUR HEADPHONE:
•
Press and hold the Volume Up
for 3 to 5 seconds to unpair the headphones from your smart-
phone.
The status LED
message "Your device is disconnected" is heard.
to "on" (The power status led
7
a little onger (approx. 3
2
a little longer (approx. 2 sec.)
2
and Volume Down
1
then fl ashes red and blue alternately and the
4
lights
8
buttons
3
13