Fleetwood CFI-275 Buku Petunjuk - Halaman 3

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Peralatan Dapur Fleetwood CFI-275. Fleetwood CFI-275 6 halaman. Food slicer

-Switch machine ON. With the Knife in movement press the push button nº1 (Picture-11)

with your thumb. It pushes the grinding stone directly against the Knife. Keep the push

button pressed for 2 or 3 seconds. Repeat this operation 3 times.

-After sharpening press button nº2 (Picture-11) to free the Knife from burrs.

-When sharpening is over turn machine OFF and place the Sharpener back to its original

position by loosening the Knob nº1 (Picture-07), turning it counterclockwise. Lift the

sharpener and rotate it ½ turn clockwise. Lower the sharpener and tighten the Knob locking

the sharpener.

5.1 Cleaning of Sharpener

After removing the sharpener from the machine:

- Thorougly clean the grinding stone surfaces covered by a coat of grease with a brush and

denatures alcohol to get the emeries as aggressive as originally.

- After many grinding operations and when the grinding stones have become dull, replaces

them.

- After cleaning, reinstall the sharpener on the machine.

6. LUBRICATION

Every week or at least monthly, lubricate the Carriage round slide guideway nº01 (Picture -

12) and the Slice Device shaft with three drops of mineral oil (e.g. petrolatum oil type P30)

for smooth Carriage and Slice Device motion. Distribute over surfaces by moving either the

Carriage or the Slice Device back and forth.

CAUTION: Do not use vegetable oil (olive oil).