ETA Systems PD11P Panduan Pemilik - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Unit distribusi daya ETA Systems PD11P. ETA Systems PD11P 13 halaman. Conditioned power distribution sequential power up / power down
Juga untuk ETA Systems PD11P: Panduan Pemilik (8 halaman)
Halaman Cetak
PD11P, PD11VP, PD11LP, PD11LVP Features:
• Light Switch (PD11LP/LVP/LVSP) activates rack illumination; choice of HI or LOW intensity
• Light Tubes (PD11LP/LVP/LVSP) illuminates up to 25 rack spaces
• 4 dual 20 amp U-grounded switched outlets per unit
• 1 dual 15 amp U-grounded "always on" and protected outlet
• Digital Voltmeter Readout (PD11VP/LVP/LVSP) displays incoming line voltage
• Resettable 20 amp thermal circuit breaker; 15 amp for front panel outlet
• Lighted Outlet Power Switch activates protection and filtration to all switch outlets and front panel outlet
• 12-gauge, 3-prong, 10-foot, 20-amp power cord. Requires 20 amp circuit and receptacle outlet
• Protected "always on" 15 amp AC power outlet on the front panel
• Total unit 20 amp and 15 amp outlet circuit breakers located on front panel
• Three-stage spike and surge protection
• Two-stage EMI/RFI filtration
• Ground and AC line fault check
• One rack space high
• One year limited warranty
PD11LVSP Features:
• Microprocessor monitored sequential power distribution system
• Four power up/down steps or stages of distributed and conditioned power
• Four pre-set power up/down intervals of 1, 5, 10 or 30 seconds
• Optional manual settings for up to 240 seconds between intervals
• One dual 120 amp U-grounded outlet per stage
• One dual 20 amp "always on" U-grounded outlet
• Full 20 amps, 2400 watts capacity per unit
• 12-gauge, 3-prong, 10-foot, 20-amp power cord. Requires 20 amp circuit and receptacle outlet
• Protected "always on" 15 amp AC power outlet on the front panel
• Total unit 20 amp and 15 amp outlet circuit breakers located on front panel
• Three-stage spike and surge protection
• Two-stage EMI/RFI filtration
Other Features:
•
Remote control operation
•
The remote feature is accessed externally through a 3-wire remote block
PD11LVSP/LVP/LP/VP/P Specifications:
Dimensions
Weight
Quality Finish
Electrical
Max. amps
Max. watts
Max. front outlet
Spike/surge protection
Clamping level
Response time
Max. surge voltage
Max. surge current
Max. spike energy
Noise attenuation
Certification
19" L x 10" D x 1 3/4" H
10 lbs.
Black powder coat chassis, black anodized aluminum front panel
120V, 50/60 Hz, single phase
20/unit
2400/unit
15 amps
Line to neutral, neutral to ground, line to ground
200V peak
1 nanosecond
6000V
23,000 amps (PD11LVSP/LVP/VP/LP/P)
630 joules total
Transverse > 20 dB, 1.5 kHz to 200 MHz
ETL listed