ETA Systems ETA-PD8A Panduan Memulai Cepat - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Distribusi Daya AC ETA Systems ETA-PD8A. ETA Systems ETA-PD8A 12 halaman. Ac power conditioner & distribution unit
Halaman CetakETA-PD8A
AC Power Conditioner & Distribution Unit
REAR PANEL FEATURES
5
4
3
1
2
1. AC Mains Input
Connect the IEC 14 Gauge 12' (4m) power cord to a 15A 120VAC outlet to provide power to the ETA-PD8A.
2. AC Mains Input IEC Power Cord Retainer
The ETA-PD8A incorporates an IEC power cord retainer bracket to prevent the cord from coming loose. See IEC power cord retainer
bracket installation.
3. AC Mains Power Breaker
The 15A rated breaker will open if the combined draw of all AC outlets exceeds 15A. Note: The breaker is designed to exceed its rating
for a short period of time. If the breaker is tripped, the load must first be removed from the ETA-PD8A before pushing to reset.
4. Unswitched AC Outlet
The 120VAC outlet is always live when the ETA-PD8A power cord is plugged into an AC mains power source. Note: The AC mains
power switch does not affect the Unswitched AC Outlet but it is protected with surge protection circuitry.
5. Switched AC Outlets
The seven 120VAC outlets are always live when the ETA-PD8A front panel power switch is in the On position.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800-321-6699 • Fax: 800-996-3821
– 8 –
ETAsys.com
Specifications are subject to change without notice.