DocuSign Signature Appliance Petunjuk Manual - Halaman 7

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Server DocuSign Signature Appliance. DocuSign Signature Appliance 11 halaman.

5. Tighten all four screws (the two screws securing the front rail-support, and the two screws

securing the rear rail-support).

6. Verify that the front and rear rail-supports now form a broken single rail-support, running from

the front to the rear of the rack (see

Note: The center slits in the rail-supports are used in

Step 2: Attach two rail-supports (front and rear) to the left side of the rack

In this step, you will attach the rail supports to the left side of the rack:

 A front rail-support to the front of the rack

 A rear rail-support to the rear of the rack.

The two rail-supports should be aligned with each other.

Follow the instructions detailed in

Note: The rail supports for the left side of the rack are identical to the rail supports for the right side of

the rack.

In this step you will:

 Attach a rail to the inner side of the right rail-supports.

 Attach a rail to the inner side of the left rail-supports.

1. Prepare the following:

 Two rails

221 Main Street, Suite 1000, San Francisco, CA 94105

Figure

3).

Figure 3

Step 3

Step

1, but install the rail-supports on the left side of the rack.

Tel. 866.219.4318

to attach the rails to the rail-supports.