Etac Molift EvoSling HighBack Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Bantuan Mobilitas Etac Molift EvoSling HighBack. Etac Molift EvoSling HighBack 12 halaman.

Halaman Cetak

Molift EvoSling / www.etac.com

When moving the user, stand to the side of the

person you are lifting. Make sure that arms and

legs do not obstruct the seat, bed, etc.

1. Check that the sling is correctly fitted around

the user and that the strap loops are correctly

fitted to the suspension hooks.

2. Start lifting until the lifting straps are stretched

without lifting the user. Ensure that all four

loops of the sling are securely fastened to

avoid the user slipping or falling out of the

sling.

3. Lift user, and perform transfer.

Never lift the user higher than

necessary to carry out a lift.

Remember that wheels on a mobile

hoist must NOT be locked.

Never leave a user unattended in a

lifting situation.

Be careful during movement, the user may swing

during turns, stops and starts. Be careful when

manoeuvring close to furniture to prevent the

suspended user from colliding with these objects.

The hoist should not be used to lift

or move users on sloping surfaces

Avoid deep pile carpets, high thresholds, uneven

surfaces or other obstacles that may block the

castors. The hoist may become unstable if forced

over such obstacles increasing the risk of tipping

over.

Transfer

Lowering into sitting

When transferring the user into a sitting position,

the following techniques can be used for lowering

the user as far back into the seat as possible:

A Push gently on the users knees to steer the

user in towards the backrest of the chair.

B Tilt the seat backwards.

Do not lift with the guide

handles! Excessive force on the

handles can cause the sling to tear.

User must be facing the hoist when

lifting or lowering from or into a

chair.