Clinispin Horizon 755VES Panduan Operator - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Operator untuk Peralatan Laboratorium Clinispin Horizon 755VES. Clinispin Horizon 755VES 16 halaman. Laboratory centrifuge

Halaman Cetak
Specifications for the Clinispin Horizon 755VES Centrifuge
Maximum speed:
Maximum Force (rcF):
Overall dimensions (h x W x d):
centrifuge Motor:
protection Breaker:
Timer:
Weight:
permitted Environmental conditions
Ambient Temperature during Operation:
Maximum relative Air humidity:
Electrical requirements:
power:
Voltage:
Frequency:
6-carrier Horizontal (Standard)
4-Place Carrier
p/n 7713023
Carrier
Cap
p/n
7713035
50mL Carrier
p/n 7713037
Any use other than those specified by the Manufacturer is explicitly prohibited. Maximum sample density is 1.15 grams / mL,
(water density = 1.0 grams / mL) *See label on rear of centrifuge for voltage requirements.

SpecificAtionS:

3500 RPM
2200 xg
23 x 37 x 43 cms
1/2 H.P. Brushless DC
4 Amp. re–settable
electronic, with hold
or 0 to 99 minutes, +/- 1%
17.7 kgs
North America:
Japan:
Europe:
Part No. # Max tube Size SPeed raNge
7786022 comes with your choice of 6 of the holders listed
w/4-Place carrier
7713023 24 17mm x 100mm 500 to 3,500 rPM
w/4-Place carrier
7713023 12 17mm x 125mm 500 to 3,500 rPM
w/50mL Hor. carrier
7713037 6
6-Place 50mL Fixed-angle 7786044 comes with 6 of the holders listed
w/50mL Fixed-angle holder 7787051 6
20-Place Fixed-angle
7786042 comes with 20 of each of the holders listed
w/75mm tube holder
7713043 20 17mm x 75mm 500 to 4,000 rPM
w/100mm tube holder 7713040 20 17mm x 100mm 500 to 4,000 rPM
w/125mm tube holder 7713044 20 17mm x 125mm 500 to 4,000 rPM
12-Place Horizontal
7786024 comes with 20 of each of the holders listed
w/75mm tube holder
7713043 20 17mm x 75mm 500 to 3,200 rPM
w/100mm tube holder 7713040 20 17mm x 100mm 500 to 3,200 rPM
w/125mm tube holder 7713044 20 17mm x 125mm 500 to 3,200 rPM
50mL
tube holder
fixed-angle
p/n 7787051
page 4
2
C - 35
C
o
o
90%
200 Watts
115 Volts (+/- 10%)
100 Volts (+/- 10%)
230 Volts (+/- 10%)
50/60 Hz
34mm x 115mm 500 to 3,500 rPM
34mm x 125mm 500 to 4,000 rPM
100 mm
Tube Holder Cap
Tube Holder
p/n 7713011
p/n 7713040
125 mm
75 mm Tube
Tube Holder
Holder
p/n 7713044
p/n 7713043
Force raNge
40 to 2,200 xg
40 to 2,200 xg
40 to 2,200 xg
40 to 2,000 xg
40 to 1,700 xg
40 to 1,900 xg
40 to 2,000 xg
40 to 1,240 xg
40 to 1,540 xg
40 to 1,830 xg