3M 4000 Series Manual - Halaman 2

Jelajahi secara online atau unduh pdf Manual untuk Produk Pernapasan 3M 4000 Series. 3M 4000 Series 4 halaman. Reusable half face masks

Halaman Cetak

Filter Table

Filter

Hazard

4251

(FFA1P2 R D)

Organic Vapours

4255

and Particulates

(FFA2P3 R D)

Organic Vapours,

4277

Inorganic Gases,

(FFABE1P3 R D)

Acid Gases and

Particulates

Organic Vapours,

Inorganic and

4279

Acid Gases, plus

(FFABEK1P3 R D)

Ammonia and

Particulates

Standards and Approval

The 3M™ 4000 Series Respirators meet the performance

requirements of the European Standard EN 405:2001+A1:2009

for valved filtering half-mask respirators for gases, vapours and

particulate combinations.

The 3M™ 4000 Series Respirators have met the requirements

of the European Community Directive 89/686/ EEC (Personal

Protective Equipment Directive) and are thus CE marked.

Certification under Article 10, EC Type- Examination, has been

issued for these products by INSPEC International Limited, 56

Leslie Hough Way, Salford, Greater Manchester M6 6AJ, UK

(Notified Body number 0194). Certification under Article 11, EC

quality control, has been issued by BSI Product Services (Notified

Body number 0086).

Industry

• Anywhere conventional paints are used.

(non-Isocyanates, subject to usage

conditions)

• Vehicle manufacture

• Plant equipment manufacture

• Shoe treatment and tanneries

• Domestic appliance manufacture

• Aircraft manufacture and refurbishment

• Boat building

• Machinery manufacture

• Chemical manufacture and handling

• Ink and dye manufacture and usage

• Adhesive manufacture and laboratories

• Paint and varnish manufacture

• Manufacture and use of resins

As 4251 but also:

• Electrolytic processes

• Acid cleaning

• Metal pickling

• Metal etching

As 4277 but also:

• Manufacture and maintenance of

refrigeration equipment

• Agrochemicals

Cleaning and Storage

If the respirator is to be used for more than one shift it should

be cleaned at the end of each shift and stored between shifts

in the original packaging. To clean the respirator, the faceseal

should be wiped with a cloth moistened in warm soapy water

(the water temperature should be below 40°C) and dried at room

temperature. The product MUST NOT be immersed in water

during cleaning. Alternatively, faceseal may be cleaned using the

3M™ 105 Face Seal Cleaner. Always check that the product has

not exceeded the use by date before use.

Respiratory Protection is only effective if it is correctly selected,

fitted and worn throughout the time when the wearer is exposed

to respiratory contaminants.

3M offers advice on the selection of products, and training in the

correct fitting and usage.

For more information on 3M products and services please call the

3M Health & Safety Helpline.

Materials

Component

Facemask

Head Harness

Head Strap

Inhalation Valve

Exhalation Valve

Gas and Vapour Filter Body

Particulate Filter Element

Material

Thermoplastic elastomer

Polypropylene

Polypropylene/cotton

Polyisoprene

Silicone Rubber

Activated Carbon

Polypropylene