Dodge CHALLENGER 2021 Panduan Memulai Cepat - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Mobil Dodge CHALLENGER 2021. Dodge CHALLENGER 2021 9 halaman.

HomeLink

GARAGE DOOR OPENER

While the car is ON, hold the handheld garage door transmitter 1-3 inches

from the HomeLink® button to be programmed in the vehicle.

Push and hold both the HomeLink® button being programmed and the button

on the garage door transmitter.

ERASE

ALL SET CHANNELS:

Push and hold the two outside HomeLink® buttons for 20 seconds until the orange

indicator flashes. An individual channel cannot be erased.

ROLLING OR NON-ROLLING?

Check your garage door opener motor in your garage for a "LEARN"

or "TRAIN" button by the hanging antenna. If you have one of these,

you have a Rolling Code garage door opener.

For Non-Rolling Code

garage door openers, watch for the indicator

light to go constant.

For Rolling Code

garage door openers, watch for the indicator light to

go from a slow blink to blinking rapidly.

For Rolling Code

garage door openers only, firmly push and release the

"LEARN" or "TRAIN" button on your garage door opener motor in your garage,

then push the HomeLink® button in your vehicle for two long holds.

If the programming was successful, your garage door should

open and close with your chosen HomeLink® button.

For more detailed instructions, see "Universal Garage Door Opener

(HomeLink®)" in your Owner's Manual.