DOEPFER A-147 Manual

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Perekaman DOEPFER A-147. DOEPFER A-147 8 halaman. Vclfo

doepfer

Reset

System A - 100

A-147

VCLFO

Frequ.

1. Introduction

Module A-147 (VCLFO) is a voltage controlled low

frequency oscillator, which can produce cyclical con-

trol voltages over a 0.01Hz to 50Hz frequency range.

The VCLFO can be patched as a modulation source

for a wide range of modules (for instance, modulation

of VCO pulse-width or frequency, VCF cut-off fre-

quency, VCA amplitude modulation) and as a provider

of repetitive or clock voltages (for instance to drive the

A-161 clock sequencer).

Four waveforms are available: triangle, sine, square,

and falling sawtooth waves.

The VCLFO's frequency can be controlled by hand,

but also by voltage control.

You can sync the VCLFO to another waveform by

connecting the other waveform (eg another LFO) to

the VCLFO's reset input.

A-147

VCLFO