Etaluma LS460 Panduan Memulai - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Memulai untuk Mikroskop Etaluma LS460. Etaluma LS460 14 halaman. Lumascopes with lumaview (for use with ls560, ls460, ls600, ls620, ls720)

Halaman Cetak

b. MeGUI video conversion program found at http://sourceforge.net/projects/megui/. After the

zipped folder (MeGUI_2525_x86.zip) has downloaded, click to open and Extract All. Depending

on your computer and Windows version, it may be necessary to right click on the .zip file to

complete the extraction. After extracting the files from the zipped folder, you will see the file

MeGUI Application with a green icon in the MeGui_2525_x86 folder. Extraction so that the

green icon is shown is essential for the images to be scripted correctly for video compiling. If

desired, make a shortcut on your desktop.

2. When the desired field has been illuminated and focused in Live Image Window (Section II.E.

above), click the Video Record icon in the Left Tool Bar (fifth from the top) to open its dialog box.

Also check parameters such as format type in Instrument Setup (Section II.D.) Enter the Full Path

information and check Add time-stamp label if desired. Images captured will be saved to the folder

shown; this can be changed, e.g., to a new subfolder set up within the Video folder.

Click OK and image capture will begin. To stop image

capture, click the Record Video icon in the Left Tool

Bar again.

3. To compile the images into a video, click on the

MeGUI Application to open the program (may take

several minutes).

4. At the end of the AviSynth Script line near the top, click browse ("..."). A MeGUI window named

Open AviSynth script will open. Depending on the computer and Windows version used, the

channel subfolders from the most recent time-lapse capture (F1, F2, F3, W) may be listed. Or it

may be necessary to browse to your Destination Folder and open to access the channel subfolders.

Open the desired subfolder and click on the Avisynth (.avs) file.

5. A preview video window will open; click Play to see a short segment of your video.

6. Return to the MeGUI window and select File Format (MP4 recommended). Click Queue button for

Video encoding on right (button about halfway down the dialog box).

7. An encoding window will open and you will see progress in a green horizontal bar until video is

completed and window closes. Close MeGUI window.

8. Video will be saved in the channel subfolder within the Destination Folder described above.

2017.11.20

LS560/460 Startup Guide