DOEPFER A-100 Series Menghubungkan - Halaman 3

Jelajahi secara online atau unduh pdf Menghubungkan untuk Synthesizer DOEPFER A-100 Series. DOEPFER A-100 Series 8 halaman. Analog modular system, connecting the breakout module to the main module
Juga untuk DOEPFER A-100 Series: Panduan Petunjuk Pengoperasian (8 halaman), Manual (16 halaman), Panduan Pengguna (12 halaman), Manual Perakitan dan Pengkabelan (6 halaman), Manual (8 halaman), Manual (8 halaman), Manual (6 halaman)

Halaman Cetak

Jumper-Position

Filtertyp

(zurück zum A-127)

Jumper position

filter type

(back to A-127)

Notch

Lowpass

Bandpass

(factory setting)

Highpass

bus board connector

zur Busplatine

rote Ader

red wire

G = GND / Masse

IN = Audio Input / Audio-Eingang

H = Highpass / Hochpass

L = Lowpass / Tiefpass

B = Bandpass / Band pass

R = Return Signal to A-127 /

- = unused / unbenutzt

A-127BOM Erweiterungsmodul

A-127BOM Break Out Module

Pin-Belegung von JP3, JP5, JP7

Pin Out of JP3, JP5, JP7

B L H IN

R R

Retour-Signal zum A-127

oberes Filter

upper filter

mittleres Filter

middle filter

unteres Filter

lower filter

rote Ader

red wire