Dog trace d-control 1502 mini Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Produk Perawatan Hewan Peliharaan Dog trace d-control 1502 mini. Dog trace d-control 1502 mini 20 halaman. Electronic training collar

Halaman Cetak

Switching ON/OFF

SWITCHING THE TRASNMITTER ON/OFF
Switching on: Press down for 1 second the button
The LCD display indicates that the unit is active.
Switching off: Again, press down for 1 second the button
SWITCHING THE RECEIVER ON/OFF
A magnet located at the lower part of the transmitter is used to activate or deactivate the magnetic
switch located in the receiver.
Switching on: approach the low area of the transmitter where the magnet is located until coming
 
close to the indicator located on the receiver (see the picture), hold for 1 second, the receiver
LED indicator will flash in green indicating the receiver is ON.
Switching off: approach the low area of the transmitter where the magnet is located until coming
 
close to the indicator located on the receiver, hold for 1 second, the receiver LED indicator will flash
from green to red indicating the receiver is OFF.
To extend the battery life it is necessary to switch off both receiver
and transmitter after the training is finished. If the battery will not
be in use for a month or longer, it is recommended that it is
removed from the receiver.
Switching ON/OFF the transmitter/Programming the transmitter with the receive
8
on the transmitter.
on the transmitter.