Cyklos RPM 350 Plus Panduan Pengoperasian - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Printer Cyklos RPM 350 Plus. Cyklos RPM 350 Plus 12 halaman. Rotary perforating machine
Halaman Cetak
6.6 Output table adjustment (2)
Adjust the output table (2) by pulling the table into a required position, depending on the size of
the sheet size processed.
For the easier folding of A3 perforated sheets (and bigger) you can use the bridge (29) and
backstop (28). It facilitates the stacking of sheets and substantially reduced the jamming of
paper in the perforated trace.
Note: If the table is not extended above the pad, do not overload it, as the table might get
damaged, bent etc.
28
29
6.7 Replacement and adjustment of perforating and creasing tools
To adjust the perforating tools (34, 35) or the creasing wheels (38), it is necessary to unplug the
machine. Open the cover (5) and use a hexagonal spanner to loosen the screws on the hubs of
the strippers (33) and remove the shaft with the strippers from the machine.
Loosen the screws on the hubs of all tools you want to adjust or remove. Loose tools can be
moved freely along the shafts. When the tools are positioned, the screws must be tightened and
the tools secured in the required position. Return the shaft with the strippers into the machine to
its working position near the perforating wheels.
ROTARY PERFORATING MACHINE RPM 350 PLUS
8