Dogtra IQ CLIQ Manual Pengaturan Kode

Jelajahi secara online atau unduh pdf Manual Pengaturan Kode untuk Produk Perawatan Hewan Peliharaan Dogtra IQ CLIQ. Dogtra IQ CLIQ 2 halaman. Essential compact trainer, portable remote controlled dog training collars
Juga untuk Dogtra IQ CLIQ: Panduan Pemilik (14 halaman)

Halaman Cetak

CLiQ

1. To turn the iQ CLiQ into a 2-dog system, start with the handheld

transmitter with the stimulation set to level 0. Hold down buttons

1 and 2 simultaneously for 5 seconds. You should now see that the

LED indicator is blinking rapidly.

2. With the receiver/collar turned off, take the handheld transmitter and

hold the two red on/off dots together for 5 seconds. The LED

indicator should now be blinking rapidly.

3. While both the handheld transmitter and receiver/collar LED

indicators are rapidly blinking, press button 2 to code that button to

the receiver/collar you desire. The LED indicators on both the

handheld transmitter and receiver/collar will blink rapidly for 15

seconds or until they have been coded together.

4. When the iQ CLiQ has been coded with an additional receiver/collar,

button 1 will function as the Nick and Pulsating Nick stimulation on

the first receiver/collar. Button 2 will function as the Nick and

Pulsating Nick stimulation on the newly coded second receiver/collar.

5. To go back to a 1-dog system, repeat steps 1 and 2. While both the

handheld transmitter and receiver/collar LED indicators are rapidly

blinking, press button 1 on the handheld transmitter.

6. When done correctly, both buttons 1 and 2 will now only operate

the one receiver/collar you have coded. To check that the handheld

transmitter is coded to the receiver/collar, press a button on the

handheld transmitter, and the corresponding receiver/collar LED

indicator will blink.

22912 Lockness Avenue Torrance, CA 90501 U.S.A.

Tel) 310.534.0101 Fax) 310.534.9111 Toll free) 1.888.811.9111

Website) www.iqpetcollar.com

Code Setting Guide