1010 Music Bitbox Panduan Memulai Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Synthesizer 1010 Music Bitbox. 1010 Music Bitbox 2 halaman.
Juga untuk 1010 Music Bitbox: Panduan Pengguna (11 halaman)

Halaman Cetak

Adjust the parameters for a track:

A Track is a column of cells on the Main screen.

1. Press the HOME button to return to the Main screen.

2. Touch the on-screen

3. Select a Track by touching one of the vertical columns that represents the desired column of cells, and then

press INFO.

4. You will see the track parameters screen. Turn the knob next to one of the displayed parameters to adjust the

settings for the selected track. The track parameters are:

Exclusive mode: works like Ableton tracks where only one cell in each column can play at a time

Level: The overall gain of the track

Output: The output the track will use: OUT 1+2, FX1, or FX 2

Change banks or switch to a new microSD card while operating:

1. Press the HOME button to return to the Main screen.

2. Touch the on-screen

3. Touch one of the 12 on-screen bank buttons to select a different bank. Please be patient, it can take a few

seconds to load and update the screen.

Load files from a microSD card:

1. Use your laptop or other device to load clips in WAV format into the root folder of a microSD card.

2. Insert the microSD card into the MICRO SD slot, notched edge down.

3. Touch an empty, light colored cell in the grid on the touchscreen to select it.

4. Press the INFO button and then touch the on-screen

5. Use any of the Control Knobs to select a WAV file from the list that appears on the touchscreen.

Load

6. Touch

again. You will see the Main screen with the selected clip loaded into the selected cell.

Record a clip:

1. Touch an empty, light colored cell in the grid on the touchscreen to select it.

2. Press the INFO button.

3. Plug the recording source into the IN1 or IN2 jack.

4. The source will play through the corresponding output jack, OUT1 or OUT2.

5. Touch the on-screen

with other modules by using the Rec Quant parameter setting with a MIDI or CLOCK input. (See

with Clocks or Inputs

6. Touch the on-screen

7. Press the HOME button to return to the Main screen.

Export a set to Ableton Live:

1. Press HOME until you see the Menu screen containing three buttons:

2. Touch the on-screen

3. Touch one of the on-screen preset number buttons to load the preset. You will now see the Main screen with the

selected preset loaded.

4. Remove the microSD card and connect it to your computer.

5. Double click or open the SE000001.als and similar files to open your set in Ableton Live.

6. For best results, use the Save As option as well as the Collect and Save menu item to migrate the relevant

WAV files onto your machine and into the customary Ableton directory structure.

Learn more:

You can find videos and more content about how to use Bitbox on our website at 1010music.com/support.

11/3/16 3:24 PM

Tracks

button.

Preset

button.

Rec

button. Bitbox will start recording. The timing of the recording can be synchronized

below.)

Stop

button. The recording will end.

Preset

button. You will see a 4x3 grid of numbers 1 through 12 representing the presets.

Load

button.

Main

Synchronize

Presets

and

Tracks