Dogtra YS500 Panduan Pemilik - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Produk Perawatan Hewan Peliharaan Dogtra YS500. Dogtra YS500 8 halaman. No bark collar
Juga untuk Dogtra YS500: Panduan Pemilik (8 halaman), Panduan Produk (14 halaman)

Halaman Cetak

1) Turn on the Yapper Stopper by turning the

intensity dial clockwise and set it on level seven.

2) Fit the test tool on the sensor of the collar.

3) Test by scratching the rough surface of the test tool

on the collar (as shown in the diagram) using a

fingernail or pen. When the light comes on, wait for

two seconds, then repeat the same process once

more.

SELECTING ON-OFF & INTENSITY

LEVELS.

The dial on the collar is used to turn the Yapper

Stopper on and off and for selecting the intensity

level.

To turn off the Yapper Stopper , position as shown

above.

( )

Decrease

Level 1 is lowest and 7 is the highest.

By turning the ON/OFF dial clockwise with your

thumbnail, stimulation intensity increases and by

turning counter-clockwise, it decreases.

(+)

Increase