Cylon CBT-STAT Panduan Pengguna - Halaman 12
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem Kontrol Cylon CBT-STAT. Cylon CBT-STAT 20 halaman.
Halaman Cetak
ENGINEERING MODE
Keypad and Display
st
1
line (large digits)
a
nd
2
line (small digits)
b
Operation Mode indicators
c
Keypad
d
Left button
Change menu page.
Up button
Change menu line, Increase value.
Right button
Change menu page,
Start parameter editing, Accept changes.
Down button
Change menu line, Decrease value.
How to enter Engineering Mode
1.
Press and hold ("long-press") both the Up button
seconds until the 1st line
displayswith the right-most digit flashing.
2.
Enter the Engineering Mode password by changing the number on the 2nd line
•
Press the up
•
Use the left
•
The default password is which can be changed over the network.
•
To reset the entered password to the default, press and hold the left button
3.
When the correct password is displayed, press and hold ("long-press") the right button
and to open the first menu page.
How to exit the Engineering Mode
•
If you wish to exit Engineering mode at any point without entering the password, press and hold ("long-
press") both the up
12
a
(large digits) displays the text and the 2nd line
button or down
button to change the value of the flashing digit.
and right
buttons to move between digits.
and down
buttons together.
© Cylon Controls Ltd.
a
b
c
d
and Down button
together for at least 3
b
as follows:
b
to accept it
MAN0120US rev 16