cymatic audio uTrack24 audiolan Manual - Halaman 16

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Perekaman cymatic audio uTrack24 audiolan. cymatic audio uTrack24 audiolan 20 halaman.
Juga untuk cymatic audio uTrack24 audiolan: Panduan Pengguna (18 halaman)

Halaman Cetak

10.3. Playback 56 Channels (Stacked Mode)

If 24 audio channels are not enough for your production, the SYNC group can provide you with up to 96 playback

channels. It all starts by preparing proper song projects in uTool.

1. Song Preparation:

Step

Action

Create song

Define Audio

Export

Note: Make sure you properly label your hard disks. uTrack24 will play out the hard disk content without any checks if

the content matches the SYNC group unit.

With 3 uTrack24 units an Ethernet switch is needed for building the network. Optionally you may use a WLAN router

for wireless control through the uRemote app.

SYNC

uTrack24

Aug. 2016

Remarks

Click "New MultiTrack Song", then:



Give it a meaningful name. We picked "Example 56CH".



Select the number of uTrack24 devices, to define the maximum

number of available tracks.

We select 3 units (24 plus 24 plus 8 tracks). Note that we now

get 72 tracks; the effective track usage follows in step 2 below.



Select your preferred sampling rate and resolution.

(e.g. 44.1 kHz and 24-bit)

Assuming you have already prepared and exported all your tracks, drag

and drop your track wave files into the right-hand list of tracks.

In this example, all 24 tracks of the first two uTrack24 units are in use,

and the 3

uTrack24 has audio in tracks 1 to 8.

Close the project editor, go to "Export", then:



Select "Example 56CH" from the Project Explorer.



Connect and select your target hard disk.



On the bottom, select the hard disk type of your SYNC group.



Export your content.

Repeat step 4 for all three hard disks.

Make sure to properly label your hard disks in order not to end up with

swapped audio channels in your playback setup.

USE CASES