Aseptico AEU-20 Panduan Pengoperasian dan Pemeliharaan - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengoperasian dan Pemeliharaan untuk Peralatan Medis Aseptico AEU-20. Aseptico AEU-20 12 halaman. Endodontic system

Halaman Cetak

SETTING UP THE UNIT:

1. Unpack the console and check that the unit

is compatible with the voltage from the

power source. Use the 110V unit for 110-

120V 60Hz voltages, and the 220V unit for

220-250V 50Hz voltages. For alternative

voltages (220V-250V), confirm that the

type of plug cap is correct for the country

of usage and carries the proper certifica-

tion markings. The correct cord is shipped

with the console.

2. Attach the remote power cord to the back

of the console and plug into a grounded

electrical receptacle.

3. Connect the M-8 10K motor to the recepta-

cle on the lower front panel of the console.

4. Attach the appropriate "E" Type handpiece

to the motor, i.e. a 1:8 reduction contra

angle.

5. Attach the supplied foot control to the con-

nector on the back of the unit marked

"Foot Switch". An On/Off type or a variable

speed type foot control may be used.

CONSOLE

POWER

HANDPIECE

CORD

"E" TYPE

HANDPIECE

NOTE: The hand motor will remain sufficiently cool

during the normal intermittent use (IEC 601 defined

frequency of use) for which it was designed.

FOOT SWITCH

M8-10K

MOTOR