DogWatch CAT200 Petunjuk Pengoperasian - Halaman 2
Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian untuk Produk Perawatan Hewan Peliharaan DogWatch CAT200. DogWatch CAT200 4 halaman.
Halaman Cetak
Installation
The INT/EXT switch on the back of the unit allows you to choose your preferred application.
You cannot use both applications at the same time.
INT allows you to use the transmitter without a boundary wire.
EXT allows you to use the transmitter with a boundary wire.
WITH A WIRE
When using the boundary wire (EXT), you can create one or more avoidance areas that are off-limits
to your pet or you can create customized containment areas. You can use the placement of the wire
plus the size of the signal field to create customized areas. There are two ways to adjust the size of
the signal field:
• Use the Signal Range adjustment
• Increase or decrease the distance between the separated wires (see below)
Follow these general guidelines when placing the wire.
• All wires should be placed so that they do not interfere with normal household activities.
• Do not install boundary wires next to baseboard heating units or set the transmitter on or near
large metal objects as the these could pick up and transmit the radio signal.
Creating a Continuous Loop
The boundary wire must form a continuous signal loop for
there to be a signal field. To accomplish this, you must strip
and twist the final ends of the boundary wire together.
The Power Status light turns red if you have not closed the
signal loop or if the wire is broken.
Creating a Signal Field
The wire included with the transmitter is a double wire.
• The wires must be separated to create a signal.
• There is no signal when the wires are next to each other.
Separating the wires increases the size of the signal field as
well as the signal range (the distance the signal travels from
the wire).
A signal field may be created in a single location or multiple
locations on the wire.
•
The boundary wire carries a harmless radio signal. You do not
need to worry about an electrical shock from the wires.
•
Boundary wire that is not separated to create a signal field may
emit a slight radio signal which could activate the receiver collar
if your pet lies directly on top of the wire.
Wire Break Alarm: If the boundary wire becomes disconnected or damaged so there is not a
continuous loop, an alarm will sound and the Power Status Light on top of the transmitter turns red.
♦ The wire break tone sounds briefly when the unit is turned on and when the frequency is changed.
2