Döhmann Helix Two Panduan Pemasangan & Pengoperasian - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Pemasangan & Pengoperasian untuk Meja putar Döhmann Helix Two. Döhmann Helix Two 18 halaman. Mk2 phonograph

Halaman Cetak

HELIX TWO Mk2 INSTALLATION & OPERATION GUIDE

For adjustments of a greater magnitude, press and hold either the top speed increase button or the bottom

speed decrease button for 5 seconds. The speed will either increase or decrease, depending on which button

you are pressing. When you are satisfied with the speed, do not press any buttons for 60 seconds. At this

point, the new calibrated speed will be stored in the turntable's memory (ROM) and will be the new setting

from that moment onwards, even if the power is turned off.

Please note that the Helix Two is a 'set and forget' design, meaning it has been designed to hold its

performance parameters and not need adjusting, so it is very rare that a turntable will require any speed

adjustment but the functionality is there in the event that it's needed.

Each Turntable has a Serial Number

Each Döhmann Audio Helix Mk2 turntable has a unique Serial Number that is recorded in the manufacturer's

database along with all of the information pertaining to that specific unit. The Serial Number starts with a

"DA" and can be found on the turntable's identification tag on the right side of the rear panel as shown in the

image above.

Register your Turntable

If you have purchased a new Döhmann Audio Helix turntable as the first owner, please register your turntable

on-line by visiting www.dohmannaudio.com , selecting 'Support

selecting 'Warranty Registration

Warranty Registration'. Please take a moment to fill out the online form to ensure that your

Warranty Registration

turntable is registered in the Döhmann Audio Warranty Program.

DA-MAN-H2-003

Support' or 'Customer Care

Support

Customer Care' from the top menu, and

Customer Care