ASG DTT-L 100 Panduan Pengguna - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Uji ASG DTT-L 100. ASG DTT-L 100 15 halaman. Digital torque testers

Halaman Cetak
Main Menu (Continued)

Load Default

The Load Default setting is used to restore the auto-shutdown, auto-reset, and pass-
fail to its original setting. These features will all be turned off.
•
To access the Load Default menu, press the MENU/ESC key, the display will show
the main menu page. Use the UP and DOWN ARROW keys to move the cursor
point to SETTING. Press the ENTER key. Press the UP and DOWN ARROW keys to
move the cursor point to LOAD DEFAULT and press the ENTER key.
•
Press the ENTER key to reset to default settings
Press the ESC key to return the main menu page
•

Memory

This is used to view the saved record, delete the last record, or delete all records.
•
To access the Memory menu, press the MENU/ESC key, the display will show
the main menu page. Use the UP and DOWN ARROW keys to move the cursor
point to MEMORY. Press the ENTER key. The display will show the Memory
menu page.
•
In this sub-menu, memory is able to be viewed, delete last, or delete all
•
Press the ESC key to return to the main menu page

View

This is used to view all saved records in memory. The detail of each saved record
consists of mode, reading value with unit, and direction.
To access the View menu, press the MENU/ESC key, the display will show the
•
main menu page. Use the UP and DOWN ARROW keys to move the cursor
point to MEMORY. Press the ENTER key. Press the UP and DOWN ARROW
keys to move the cursor point to VIEW and press the ENTER key.
•
Use the UP and DOWN ARROW keys to scroll through the readings
•
Press the ESC key to return to the memory menu page
ASG, Division of Jergens, Inc.
S. Waterloo Road | Cleveland, OH
15700
DTT-L Series Digital Torque Testers
User Manual
| Phone: (
44110-3898
888) 486-6163
| Fax: (
| Email: [email protected] | www.asg-jergens.com
216) 481-4519
LOAD DEFAULT
AUTO-SHUTDOWN
=
OFF
AUTO-RESET
=
OFF
PASS-FAIL
=
OFF
Press ENTER > Accept
Page 13 of 15