ASG DTT-L 5 Panduan Pengguna - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Uji ASG DTT-L 5. ASG DTT-L 5 15 halaman. Digital torque testers

Halaman Cetak
Main Menu (Continued)

Pass-Fail

The pass-fail feature is used to set a defined acceptable maximum and minimum
torque range for measuring. It is activated by setting the lower level and upper level
torque limit. As long as the torque value is within this range, the green LED display
button will light up OK. Any reading values outside this range (higher or lower), the
orange LED display buttons will light up. The orange up arrow will light up if the
torque range is higher than the set range and the orange down arrow will light up if
the torque range is lower than the set range. If this feature is activated, the PF symbol
will display on the main display.
•
To access the Pass-Fail menu, press the MENU/ESC key, the display will show the
main menu page. Use the UP and DOWN ARROW keys to move the cursor point
to SETTING. Press the ENTER key and use the UP and DOWN ARROW keys to
move the cursor point to PASS-FAIL. Press ENTER. The display will show the
Pass-Fail menu page.
Press the ESC key to return the main menu page
•
•
Use the UP and DOWN ARROW keys to change the value. Use the RIGHT
ARROW key to change the unit. Use the LEFT ARROW key to toggle between
the upper and lower limits. Press the ZERO key to reset value to zero. Press the
ENTER key to set new value and return to setting menu. Press ESC to return to
setting menu.
NOTE: Lower level must be less than the upper level
Example:
Lower Level
= 0 N.m
Upper Level
= 20 N.m
LOAD
Upper Torque
Level
TIME
ASG, Division of Jergens, Inc.
S. Waterloo Road | Cleveland, OH
15700
DTT-L Series Digital Torque Testers
User Manual
Example:
Lower Level
= 20 N.m
Upper Level
= 0 N.m
LOAD
Lower Torque
Level
| Phone: (
44110-3898
888) 486-6163
Example:
Lower Level
Upper Level
Upper Torque
Lower Torque
TIME
| Fax: (
| Email: [email protected] | www.asg-jergens.com
216) 481-4519
= 10 N.m
= 20 N.m
LOAD
Level
Level
TIME
Page 12 of 15