CYP CM-330 Panduan Pengoperasian - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Konverter Media CYP CM-330. CYP CM-330 5 halaman. Ntsc/pal video to vga converter

Rear Panel

1. DC 7.5 V- This is the power supply input port.

2. S-Video Input- This is the S-Video input port. Using the appropriate connector

cable (4 Pin Din connector) connect the port to your input device.

3. Video Input- This is the composite Video input port. Using the appropriate

connector cable (RCA Jack) connect the port to your input device.

4. S/Video Input switch- Switch the button to the type of video input selected.

5. VGA Output- This is the VGA output port. Using the appropriate connector

cable (15 Pin D Female connector) connect the port to your output device.

Connection and Installation

The AC adaptor power unit should not be plugged into a wall outlet until all connections

are complete.

Connect the V-In or S-In port (Numbers 2/3 on the rear panel) to your video input

device.

When you have selected the input port, switch the S/Video input switch (Number 4

on the rear panel) to the selected input.

Connect the VGA output port (Number 5 on the rear panel) to your VGA monitor

output device.

Once all connections are complete please connect the power supply provided to the

power socket.

NOTE- This model does not work with LCD panels.

Please browse our online catalogue to view our full product range.

44-48 Maitland Road, Mayfield East, NSW, 2304 Australia,

Phone +61 249689313 Fax +61 249689314

www.converters.tv