CYP EL-41S-4K Panduan Pengoperasian - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Pengalih Matriks CYP EL-41S-4K. CYP EL-41S-4K 20 halaman.
Halaman Cetak
6.2 Rear Panel
HDMI IN
1
2
1
1
HDMI IN: Connect to HDMI source equipment such as Blu-ray/
DVD/PS3 players, Set-Top-Box or any HDMI equipped source device.
The device has an auto detection function that will detect the last
connected source for display on output when it is unplugged, the
device will detect rotationally from 1~4 input source for display on
output.
2
HDMI OUT: Connect to an HDMI TV/display or HDMI equipped AV
Receiver for video/audio output of the selected source.
3
SERVICE: This slot is reserved for firmware update use only.
4
CONTROL: Connect to an active network for Telnet or WebGUI control
with an RJ-45 terminated cable (see section 6.7).
5
RS232: Connect to a PC/Laptop or RS-232 control device for RS-232
control of the device (see Section 6.4/6.5).
6
IR IN: Connect the IR Receiver included in the package for IR signal
reception from the included remote control. Ensure that the receiver
is in direct line-of-sight of the the remote being used
7
DC 5V: Connect the adaptor with power cord included in the package
and connect to AC wall outlet for power supply.
HDMI OUT
3
4
2
SERVICE
CONTROL
RS-232
3
4
5
IR IN
DC 5V
6
7
9