DOKOKI 10010101 Panduan Pengguna - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor Bayi DOKOKI 10010101. DOKOKI 10010101 15 halaman.

Mounting the Bed Bracket
The flat side of the bracket.
1
Mounting the Bed Bracket
Mount the bracket with the flat side facing inward. Next, fasten
it using the supplied screws through the predrilled holes in the
bracket.
! !
Important Note
Due to the risk of injury, the bracket must be bolt-
ed tight. Otherwise, Sandy could fall!
4
Keep Cable Away From the Child!
Important Note
! !
Since there is a potential risk of strangulation due
to the charging station cable, you must ensure
that the cable is not laid in the baby's area.
14
2
Mounting the Charging Station
Insert the two lugs on the bed bracket into the holes on the un-
derside of the charging station. Make sure that the cable points
to the outside.
Sandy's Head and Camera
Sandy's Head Movements
Sandy's head can be rotated 90 degrees horizontally to the left
and to the right. Please do not try to turn Sandy's head any fur-
ther using force. This may cause damage to the device. Vertically,
Sandy can be tilted 6° up and 15° down.
Turn counterclockwise.
3
Attaching the Charging Station
Now turn the charging station counterclockwise with a bit of
pressure until it stops.
1000
Viewing Angle of the Camera
The camera ensures a full view of the baby (when mounted at the
foot of the crib).
EN
700