CYP PU-424HBTL-KIT Panduan Pengoperasian - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Pengalih Matriks CYP PU-424HBTL-KIT. CYP PU-424HBTL-KIT 20 halaman. 4 x 4 hdmi hdbaset™ lite matrix (with 2 simultaneous hdmi outputs) including 4x pu-514l-rx receivers
6.2 Rear Panel
A
HDMI OUT
CAT5e/6 OUT
SERVICE
1
2
3
1
RS-232: Connect to a PC or control system with D-Sub 9-pin cable for
RS-232 control.
2
CONTROL: Connect to an active network for Telnet/Web GUI control
(refer to Section 6.8).
Warning: Please do not connect this port directly to the PC/Laptop
as the Telnet function will not work.
3
SERVICE: Manufacturer use only.
4
HDMI OUT & CAT5e/6/7 OUT A/C: Simultaneous HDMI and HDBaseT
CAT5e/6/7 output. The HDMI output can be connected directly to a
display or to a point transmitter/receiver set. Connect the CAT5e/6/7
output to a compatible receiver unit to extend the signal up to 60 m.
5
CAT5e/6/7 OUT B/D: Connect from these CAT outputs to the CAT input
port of the receiver units with a single CAT5e/6/7 cable for HDMI Audio/
Video and IR control signal transmission.
6
HDMI IN 1~4: Connect to the HDMI input source devices such as a
DVD player or a Set-top Box with HDMI cable or DVI to HDMI cable.
7
IR IN 1~4: Connect the IR extenders for IR signal reception. Ensure
that the remote being used is within the direct line-of-sight of the IR
extender.
8
IR OUT 1~4: Connect the IR blasters for IR signal transmission. Place the
IR blaster in direct line-of-sight of the equipment to be controlled.
9
ALL IR OUT: Connect to the IR blaster for IR signal transmission of the
source or display equipment. Place the IR blaster in direct line-of-sight
of the equipment to be controlled.
10
ALL IR IN: Connect to the IR extender for IR signal reception of the remote
control of this device or the source and display equipment. Ensure that
remote being used is within the direct line-of-sight of the IR extender.
11
DC24V: Connect the 24 V DC power supply to the unit and plug the
adaptor into an AC outlet.
4
7
B
1
2
IR IN
IR OUT
IR IN
IR OUT
IR IN
CAT5e/6 OUT
HDMI IN 1
HDMI IN 2
HDMI IN 3
6
3
4
C
IR OUT
IR IN
IR OUT
HDMI OUT
CAT5e/6 OUT
HDMI IN 4
8
5
9
D
ALL
IR OUT
GND
GND
2
1
4
3
V+
+
V
CAT5e/6 OUT
GND
IR IN
DC 24V
10
11
9