Ashcroft 2232 Panduan Petunjuk Pengoperasian - Halaman 16
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Alat Ukur Ashcroft 2232. Ashcroft 2232 20 halaman. Digital sanitary gauge
Halaman Cetak
DIGITAL SANITARY GAUGE SPECIFICATIONS
Type
Accuracy: Terminal Point
Full Scale
Case Size
Case Material/Finish
Case Enclosure Rating
Wetted Parts
Tri-Clamp Connection
Seal Surface Finish
Connection Location
Ranges
(2)
Process Temp. Limits
(3)
Ambient Temp.Limits
Temperature Error
Storage Temperature
Overrange Pressure
DISPLAY
Type
Display Digits
Character Height
Backlite
Bar Graph
Battery Life
Agency Approvals
KEYPAD FUNCTIONS
On/Off
Zero/Clear
Min/Max Arrow Key
Menu
Backlite (optional) Arrow Key Manually Turns Backlite On & Off (auto off options in menu),
Enter
MENU MODE
Engineering Units (Units)
Configuration Mode(Config)
Bar Graph (Graph)
Auto Off (Off)
Update Rate (Update)
Dampening (Damp)
Backlite Lit (optional)
Zero Disable
Field Recalibration
Calibration
OPTIONS
4-20mA Display
Line Powered
Switching
Remote Mount Seal
Notes (1) 3´ shielded cable standard
(2) Rezero gauge often after exposure to elevated temperatures and use.
(3) The 2030 Series Digital Gauge is not suitable for an autoclave.
Conventional Tri-clamp: 2032 (battery), 2132
In-line Tri-clamp: 2036 (battery), 2136 (4-20mA), 2232 (line)
.25% F.S. Accuracy:
3˝
(3˝) 300 series SS, Electropolished
Weatherproof, IP65, NEMA 4
316 SS
Direct, in-line 1
1
⁄
˝, 2˝, Ashcroft remote in-line (XRE),
2
12-20Ra
Lower
15 psi thru 1,000 psi including metric, compound & vac
14°F / 275°F (-10°C / 135°C) to withstand clean in place
(CIP) & steam in place (SIP)
14°F / 140°F (-10°C / 60°C)
± .22% per 10°F, (12°F) (Span and Zero shift can be eliminated
by rezeroing the gauge at operating temperatures. Temperatures
must be within process temperature limits)
-4°F / 158°F (-20°C / 70°C)
2x range of gauge
LCD
5 Digits
.60˝
Off By Default
Yes
1000 Hrs., Battery Life Indicator - standard
CE (excludes XRE variation)
Material Traceability Certification to EN 10204: 2004 3.1 standard
Manually Turns Unit On & Off (auto off options in menu)
Zeros Display or Clears Min/Max Values When Displayed
Stores Min & Max Values, Arrow Key allows for scrolling
thru Menu items
Allows for changes to default settings (See Below)
Arrow Key allows for scrolling thru Menu items
Selects Items In the Menu
Allows Scrolling Through Menu To Select Available Options
10units of measurement are available psi, inh
options: 20°C, 60°F, 4°C*, mmHg, fth
Allows for changes to default settings of gauge
Allows for adjustment of bargraph & 4-20(optional feature)
Allows for changes to auto off of gauge 5 Options:, 30 Min.,
10 Min., 5 Min., 2 Min., Never
4 Options: 100mili-sec, 1sec, 500mili-sec,200mili-sec,
6 Options: None, Average 8, 6, 4, 2 times per 100ms
5 options: NEVER, 10 sec, 30, sec, 1 min, 5 min.
Zero "lockout" feature
Zero, Span & Midscale (password protected)
Allows for recalibration of zero & span
(includes factory default calibration)
12-36 Vdc
(XU1 code) (1) or (XU@ code) (2) SPDT switches, (requires line
power), (max. contact 30Vdc, 1 amp, 125Vac, .5 Amp)
Switches adjustable to 100% of range
(RE code) standard with 10´ shielded cable
– 16 –
(1)
(4-20mA), 2232
(1)
(line)
o with 3 temp.
2
o, mPa, kPa, kg/cm
& bar
2
2