Acquaer SUS050T Panduan Pemilik - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Pompa Air Acquaer SUS050T. Acquaer SUS050T 17 halaman.

Place the pump in the sump; make sure that nothing interferes

with switch operation.

CAUTION: Make sure the pump cannot move in the sump. If the

pump moves when it runs, the piping or sump wall may interfere

with the switch and prevent the pump from starting or stopping

causing a risk of flooding.

Finish installing the necessary plumbing. Follow the pipe glue

manufacturer's instructions for safety precautions and curing

time.

Power Supply: This pump requires a 115V, 60Hz, 15 amp individual branch circuit. The circuit must be

grounded and should be dedicated to the sump pump.

The pump is supplied with a 3-wire cord set with grounding- type plug. Insert

the switch plug directly into the outlet then insert the pump plug into the back

of the switch plug.

CAUTION: To avoid the risk of electrical shock, always ground the pump to a

suitable electrical ground, such as a grounded metal water pipe, a properly

grounded metallic raceway, or a ground wire system. Do not cut off the round

ground pin from the pump or switch plugs.

INSTALLATION INSTRUCTIONS

Switch Plug

Pump Plug